User manual

ManualsBrandsChauvet ManualsFlood LightHIVE

HIVE™ User Manual Page 15 of 19

Custom Color

Mixing and

Strobe Settings

To custom mix a color and select the strobe speed, do the following:

1. Press <MENU> to reach the menu’s main level and Addr shows on the display.

2. Use <UP> or <DOWN> until CoLo shows on the display.

3. Press <ENTER> and one of the following shows on the display:

• rEd (red)

• GrEE (green)

• bLUE (blue)

• So1 (strobe, slow speed)

• So2 (strobe, medium speed)

• So3 (strobe, fast speed)

4. Use <UP> or <DOWN> to select the desired color or the strobe speed setting.

5. When the desired color or strobe speed shows on the display, press <ENTER>.

With the color options, after pressing <ENTER>, the color value 0–255 (0–100%)

shows on the display. Use <UP> or <DOWN> to select the desired color value.

NOTE: Selecting 0 will turn the color off.

6. Press <ENTER> to set the color value/strobe speed.

7. Repeat steps 4 to 6 until you have your desired color and strobe speed.

NOTE: For no strobe effect, do not press <ENTER> when a strobe option shows on

the display

Display

Orientation

You are able to flip the LED display for easy readability in any mounting situation.

To select your display’s orientation, follow the instructions below:

1. Press <MENU> to reach the menu’s main level and Addr shows on the display.

2. Use <UP> or <DOWN> until dISP shows on the display.

3. Press <ENTER> and use <UP> or <DOWN> to select dISP (normal display) or

dSIP (inverse display).

4. Press <ENTER>.

Display

Background Light

You can select whether the display’s background light stays on or off after control panel

inactivity.

To select either option for the display’s background light, follow the instructions below:

1. Press <MENU> to reach the menu’s main level and Addr shows on the display.

2. Use <UP> or <DOWN> until LEd shows on the display.

3. Press <ENTER> and on or oFF shows on the display.

4. Use <UP> or <DOWN> to select the desired option.

5. Press <ENTER>.

Software Version

With the HIVE™ you can access which is the currently installed software version.

To access this information, do the following:

1. Press <MENU> to reach the menu’s main level and Addr shows on the display.

2. Use <UP> or <DOWN> until VEr shows on the display.

3. Press <ENTER>.