User Manual Legend 412 Legend 412 VW
Edition Notes Edition Notes The Legend™ 412 Series User Manual Rev. 5 covers the description, safety precautions, installation, programming, operation, and maintenance of the Legend™ 412 and the Legend 412 VW. CHAUVET® released this edition of the Legend™ 412 Series User Manual in August 2012. Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet).
Table of Contents Table of Contents 1. Before You Begin ............................................................................................... 1 What Is Included ............................................................................................................ 1 Unpacking Instructions ................................................................................................... 1 Claims .................................................................................................
Table of Contents Reset ................................................................................................................................... 14 Factory Defaults ................................................................................................................... 14 Menu Map (Legend™ 412)............................................................................................15 Menu Map cont. (Legend™ 412) ......................................................................
Before You Begin 1. Before You Begin What Is Included • One Legend™ 412 or Legend™ 412 VW • • • • One Eye Bolt (for safety cable) One Omega Bracket with M12 Bolts Warranty Card Quick Reference Guide Unpacking Instructions Immediately upon receiving this product, carefully unpack and check the container. Make sure you have received all the parts indicated above and all the parts are in good condition.
Before You Begin Symbols Symbol Meaning Critical installation, configuration, or operation information. Failure to comply with this information may render the product partially or completely inoperative, damage third-party equipment, or cause harm to the user. Important installation or configuration information. Failure to comply with this information may prevent the product from functioning correctly. Useful information.
Before You Begin Safety Notes Read all the following Safety Notes before working with this product. These Notes include important information about the installation, usage, and maintenance of this product. There are no user-serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified.
Introduction 2. Introduction Product Description -4- The Legend™ 412 Series consists of high power LED moving head wash products with 4 independent quadrants of control. It is available in a RGBW version or a VW (variable white) version with quad color LEDs. The product consists of a base and a moving head on a yoke. A Top Hat is pre-installed to reduce glare, creating a flat field of light.
Introduction Product Overview DMX In/Out Power/Fuse Rear View Side View Control Panel Front View Legend™ 412 Series User Manual Rev.
Introduction Product Dimensions 6.5 in 165 mm 12.0 in 304 mm 3.1 in 80 mm 7.2 in 182 mm 10.1 in 257 mm 11.2 in 285 mm 10.6 in 269 mm -6- Legend™ 412 Series User Manual Rev.
Introduction Product Dimensions (Cont.) 4.5 in 114 mm 5.5 in 140 mm 3.5 in 89 mm Legend™ 412 Series User Manual Rev.
Setup 3. Setup AC Power The Legend™ 412 Series has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper voltage. To determine the power requirements for the Legend™ 412 Series, refer to the specification label affixed to the product or the specifications in this manual. Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
Setup DMX Linking You can link the Legend™ 412 Series to a DMX controller using a standard 5-pin DMX serial connection. If using other DMX compatible products with the Legend™ 412 Series, you can control each individually with a single DMX controller. DMX Modes The Legend™ 412 Series uses the standard 5-pin DMX data connection for its ADVANCED and BASIC DMX personalities. Refer to the Introduction chapter for a brief description of these modes.
Setup Mounting Before mounting this product, read and follow the Safety Notes in this manual. Orientation Always mount this product in any safe position making sure there is adequate room for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends using the following general guidelines when mounting this product. • When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4.
Operation DMX Control In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison. 1. Select a DMX personality as shown in the DMX Personality section. 2. Set the starting address: a. Go to Addr and press . b. Select the starting address (001~512).
Operation Master/Slave The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the slave units) to simultaneously duplicate the output of another Legend™ 412 or Legend™ 412 VW (the master unit) without a DMX controller. 1. Set each of the slave units: a. Go to SLNd and press . b. Select SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt settings that creates a different look). 2. Set the master unit: a. Go to SLNd and press . b. Select NASt. c.
Operation -14- LED Temperature This option allows the user to view the LED temperature (C°) of the Legend™ 412 or the Legend™ 412 VW. 1. Go to Ledt. 2. Press . CPU Temperature This option allows the user to view the CPU temperature (C°) of the Legend™ 412 or the Legend™ 412 VW. 1. Go to CPut. 2. Press . Product Hours This option shows the user the amount of hours the Legend™ 412 or the Legend™ 412 VW has been in use throughout its lifetime. 1. Go to FhrS. 2. Press .
Operation Menu Map (Legend™ 412) Main Level Programming Levels Addr 1~512 Sets the DMX starting address 12Ch Sets the 12 channel personality 28Ch Sets the 28 channel personality NASt Sets product to Master in Slave mode SL 1 Sets product to Slave 1 in Slave mode SL 2 Sets product to Slave 2 in Slave mode Chnd SLnd Description Sh 1 Sh 2 Shnd Sets the Auto program Sh 3 Sh 4 YeS bLnd Selects whether Blackout mode is active no oFF Selects whether the display stays on indefinitely or tu
Operation Menu Map cont.
Operation Menu Map (Legend™ 412 VW) Main Level Programming Levels Addr 1~512 Sets the DMX starting address 10Ch Sets the 10 channel personality 20Ch Sets the 20 channel personality NASt Sets product to Master in Slave mode SL 1 Sets product to Slave 1 in Slave mode SL 2 Sets product to Slave 2 in Slave mode Chnd SLnd Description Sh 1 Shnd Sh 2 Sh 3 Sets the Show mode Sh 4 bLnd Led PAn tILt dISP YeS no Selects whether Blackout mode is active oFF Selects whether the display stays on
Operation Menu Map cont.
Operation DMX Values (Legend™ 412) 12-Channel (Basic Mode) Channel Legend™ 412 Series User Manual Rev.
Operation 28-Channel (Advanced Mode) -20- Channel Function 1 2 3 4 5 6 Pan Pan Fine Tilt Tilt Fine Pan/Tilt Speed Dimmer 7 Strobe 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Red Quad 1 Green Quad 1 Blue Quad 1 White Quad 1 Red Quad 2 Green Quad 2 Blue Quad 2 White Quad 2 Red Quad 3 Green Quad 3 Blue Quad 3 White Quad 3 Red Quad 4 Green Quad 4 Blue Quad 4 White Quad 4 Value 000 255 000 255 000 255 000 255 000 255 000 255 000 019 020 039 040 059 060 079 080 099 100 119 120
Operation 28-Channel Cont. Channel Function (Advanced Mode) Legend™ 412 Series User Manual Rev.
Operation 28-Channel Cont. (Advanced Mode) Channel 27 28 -22- Function Pan/Tilt Macro Speed Control Value 000 255 000 007 008 069 070 129 130 190 191 205 206 221 222 236 237 255 Percent/Setting 0~100% No function Reset Pan/Tilt Reset All Move in Black Reserved for future use Reserved for future use Reserved for future use Reserved for future use Legend™ 412 Series User Manual Rev.
Operation DMX Values (Legend™ 412 VW) 10-Channel (Basic Mode) Channel Legend™ 412 Series User Manual Rev.
Operation 20-Channel (Advanced Mode) -24- Channel Function 1 2 3 4 5 6 Pan Pan Fine Tilt Tilt Fine Pan/Tilt Speed Dimmer 7 Strobe 8 9 10 11 12 13 14 15 Warm White Quad 1 Cool White Quad 1 Warm White Quad 2 Cool White Quad 2 Warm White Quad 3 Cool White Quad 3 Warm White Quad 4 Cool White Quad 4 16 Color Macros 17 Color Macro Speed Value 000 255 000 255 000 255 000 255 000 255 000 255 000 019 020 039 040 059 060 079 080 099 100 119 120 139 140 159 160 179 180 19
Operation 20 Channel Cont. Channel Function (Advanced Mode) Legend™ 412 Series User Manual Rev.
Technical Information 5. Technical Information Product Maintenance To maintain optimum performance and minimize wear, clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.
Technical Information Troubleshooting Guide Symptom Product does not light up One of the LEDs does not work Cause(s) Dimmer fader set to “0” All color faders set to “0” All colors in Static mode are set to “0” No power Faulty internal power supply Faulty main control board Faulty LED Faulty LED module Faulty LED driver Action(s) Increase the value of the dimmer channel Increase the value of the color channels Increase the values of the colors Verify external power circuit and wiring Send unit for repai
Technical Information Returns Procedure You must send the merchandise prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags. Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return. Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
Technical Information Technical Specifications Legend™ 412 Dimensions and Weight Length 5.5 in (140 mm) Width 10.1 in (257 mm) Height 12.0 in (304 mm) Weight 10.1 lbs (4.58 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Electrical Power Supply Type Switching (internal) Range 100~240 V, 50/60 Hz Voltage Selection Auto-ranging Parameter Consumption Operating current 120 V, 60 Hz 144 W 1.8 A 230 V, 50 Hz 139 W .5 A Fuse T 3.15 A, 250 V T 3.
Technical Information Technical Specifications Legend™ 412 VW Dimensions and Weight Length 5.5 in (140 mm) Width 10.1 in (257 mm) Height 12.0 in (304 mm) Weight 10.1 lbs (4.58 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Electrical Light Source Photo Optic Thermal DMX Ordering Power Supply Type Switching (internal) Range 100~240 V, 50/60 Hz Voltage Selection Auto-ranging Parameter Consumption Operating current 120 V, 60 Hz 165 W 1.4 A 230 V, 50 Hz 170 W .
Technical Information CHAUVET® 5200 NW 108th Avenue Sunrise, FL 33351 (USA) (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com Legend™ 412 User Manual Rev. 5 August 2012 Legend™ 412 Series User Manual Rev.
