User manual

Operating Instructions
ILS-CON User Manual 13 3/28/2005 3:03:00 PM
CREATE A CHASE
As mentioned previously, a chase consists of one or more scenes stepped together. Scenes in a
chase are considered steps. The ILS-CON can store a maximum of 485 scenes and all of those
scenes can be stored in a single chase.
Action 
1) A chase is created by adding another step
to the same program memory button. Press
the Memory button.
2) Select the program you wish to add a step
to. Buttons (1~24).
3) See “Programming Fixtures”
4) Press the Save button.
5) Select the same Button (1~24) originally
selected to add this newly created scene to.
6) Repeat steps number 3 through 5 to add
more scenes.
Notes 
Page button toggles between (1~12) and (13~24).
See instructions on page 12.
Shortcut: Press [Memory]  Select [Button 1~24]  {Program fixtures}  Press [Save]  Select
the same [Button 1~24] to add step to memory  Repeat from {Programming Fixtures}
OVERWRITE A PROGRAM
Action 
1) Press the Memory button.
2) Select the program you wish to overwrite.
Buttons (1~24).
3) Create a new scene. See “Programming
Fixtures”
4) While holding down the Save button, press
the program button Buttons (1~24) you
previously selected again.
Notes 
Page button toggles between (1~12) and (13~24).
See instructions on page 12.
Shortcut: Press [Memory]  Select [Button 1~24] (program)  Create new scene {Program
fixtures}  Hold [Save] and press the same [Button 1~24] to overwrite
DELETE A PROGRAM
Action 
1) Press the Memory button.
2) Select the program you wish to delete.
Buttons (1~24).
3) While holding down the Cancel button,
press the program button Buttons (1~24)
you previously selected again.
Notes 
Page button toggles between (1~12) and (13~24).
Shortcut: Press [Memory]  Select [Button 1~24] (program)  Hold [Cancel] and press the same
[Button 1~24] to delete