User manual
Operating Instructions
ILS-CON User Manual 14 3/28/2005 3:03:00 PM
DELETE A STEP
Action
1) Press the Memory button.
2) Select the program you wish to edit.
Buttons (1~24).
3) See “Previewing Memory” above for
instructions on selecting a step within this
program.
4) While holding down the Memory button,
press the program button Buttons (1~24)
you previously selected again to delete the
step.
Notes
Page button toggles between (1~12) and (13~24).
See instructions on page 13.
Shortcut: Press [Memory] Select [Button 1~24] (program) Select same button to preview
another step Hold [Memory] & and press the same [Button 1~24] to delete the step
CLEAR ALL MEMORY
Action
1) Press the Blackout button for at least 3
complete seconds or until the LED blinks.
2) Press the Memory and Blackout buttons at
the same time to erase all memory.
Notes
Shortcut: [Blackout] Hold 3secs Press [Memory] & [Blackout] simultaneously
Playback
RUNNING THE SHOW (LIGHT SHOW MODE)
You will need to program scenes or chases in order to use this mode.
Action
1) Press the Light Show button
2) The first mode you will encounter will be the
Auto mode, indicated by LED number 1.
3) Select program [Button 1~24) for playback.
4) Pressing the A-S-M button will activate the
Sound mode, indicated by LED number 2.
5) Pressing the A-S-M button again will
activate MIDI triggering, indicated by LED 3.
6) Pressing the A-S-M button again will revert
back to Auto mode, indicated by LED 1.
Notes
In Auto mode, programs selected will loop
automatically. You can change the speed of the chase
and the Fade time by moving the Speed slider and the
XFade slider.
Tap the Page button to toggle between Buttons 1~24
and Buttons 13~24.
A-S-M is short for Auto – Sound – Midi, and it refers
to the button directly to the left of the Light Show
button.
In the Sound mode, programs will be triggered by the
sound using its built-in microphone.
Programs would be triggered by a MIDI device, such
as a MIDI keyboard.
Shortcut: Press [Light Show] default (Auto Mode) Optional: Choose another mode by pressing
[A-S-M] (2
nd
Sound Mode, 3
rd
MIDI Mode) Select programs using [Button 1~24] Optional:
Modify [Speed] and [XFADE] sliders