User manual

Page 20 of 32 Intimidator™ Wave IRC User Manual Rev. 1
DMX ASSIGNMENTS (CONT.)
34CH
Channel
Function
Value
Percent/Setting
34
Settings
(Set these values
before setting
other DMX
channels. There is
a 10 sec delay
before the settings
take effect)
000ó009
No function
010ó014
Move-in-black
015ó019
Cancel move-in-black
020ó024
Independent macros – cancels macro product
combinations below
025ó029
Macros used when linking 2 products together: This is
the value for first product
030ó034
Macros used when linking 2 products together:
This is the value for second product
035ó039
Macros used when linking 4 products together:
This is the value for first product
040ó044
Macros used when linking 4 products together:
This is the value for second product
045ó049
Macros used when linking 4 products together:
This is the value for third product
050ó054
Macros used when linking 4 products together:
This is the value for fourth product
055ó059
No function
060ó064
Reset tilt only
065ó069
No function
070ó074
Reset all
075ó089
No function
090ó094
Reverse tilt
095ó099
No function
100ó104
Cancel reverse tilt
105ó114
No function
115ó119
Controls all heads with head 1 channels
120ó124
Cancels control of all heads with
head 1 channels
125ó255
No function