User Manual
TABLE OF CONTENTS 1. Before You Begin ......................................................................................................................... 4 What is Included ............................................................................................................................................................. 4 Unpacking Instructions ....................................................................................................................................................
Dimming Curve ........................................................................................................................................................ 26 Dimming Speed ....................................................................................................................................................... 26 Color Balance ..........................................................................................................................................................
1. BEFORE YOU BEGIN What is Included Unpacking Instructions Claims Text Conventions • Intimidator™ Wash Zoom 350 IRC • Power Cord • Thread Reducing Adapter Carefully unpack the product immediately and check that all the parts are in the package and are in good condition. If the box or any of the contents appear damaged from shipping, or show signs of mishandling, save all packaging and file a claim with the carrier immediately, do not notify CHAUVET®.
Product at a Glance Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave Safety Notes x x P P P Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable P P P x These notes include important information about the mounting, use, and maintenance of this product. Read these notes before using the product. • Always connect the product to a grounded circuit to avoid the risk of electrocution. • Make sure the power cord is not crimped or damaged.
2. INTRODUCTION Overview Yoke Handles Ventilation Fans IR Sensor Indicator Light LCD Display Control Buttons DMX In Fuse Holder Power In DMX Out Back Panel View Power Out Intimidator™ Wash Zoom 350 IRC User Manual Rev.
Dimensions 10.6 in 270 mm 14.3 in 363 mm 7.6 in 194 mm Intimidator™ Wash Zoom 350 IRC User Manual Rev.
3. SETUP AC Power The Intimidator™ Wash Zoom 350 IRC has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the values listed on the label affixed to the product’s back panel, or refer to the product’s Specifications. The listed current rating indicates the product’s average current draw under normal conditions.
Power Linking The product provides power linking via the Edison/IEC outlet located in the back of the unit. st 1 Product Power Linking Diagram nd 2 Product rd 3 Product Additional Products Up to 5 Intimidator™ Wash Zoom 350 IRC units can be linked on 120 V, or up to 12 Intimidator™ Wash Zoom 350 IRC units on 230 V.
Mounting Before mounting the product, read and follow the safety recommendations in the Safety Notes section. Orientation The Intimidator™ Wash Zoom 350 IRC can be mounted in any position, but make sure the placement allows adequate ventilation for the product, and allows for movement of the yoke and head in any direction. Rigging Be sure to place the product in a location that allows easy access to it for maintenance and programming, and enough space around the product for ventilation.
4. OPERATION Control Panel Descrioption The control panel is used to set the operating mode, and the configuration settings of the product. Use the 4 buttons underneath the LCD display to access the control panel and navigate the menu map. For specific instructions see the Configurations sections below.
Menu Value Description ON Upside-down display Square I Squa Dimmer Curve SCurve Sets the dimmer curve mode Linear Setup (Cont.
Configuration (DMX) To set the product in DMX mode for control with a DMX controller, do the following: 1. Make sure the product is plugged into a power source. 2. Connect the male end of a DMX cable to the DMX out socket of the DMX controller and the female end of the same cable to the DMX in socket on the product. 3. Set the DMX starting address and personality by following the directions below.
DMX Channel The following table outlines all the capabilities of the Intimidator™ Wash Zoom 350 and the Assignments and channels that control them when the light is used with a lighting controller.
29-CH Channel 22 (Cont.) 23 Function Colors (Cont.) Built-in Control Intimidator™ Wash Zoom 350 IRC User Manual Rev.
29-CH Channel 23 (Cont.) Function Built-in Control (Cont.
29-CH Channel 28 (Cont.) 29 Function Control Functions (Cont.) Movement Macros Intimidator™ Wash Zoom 350 IRC User Manual Rev.
14-CH Channel Function Value Percent/Setting 1 Pan 000 ó 255 0 to 540° 2 Tilt 000 ó 255 0 to 270° 3 Speed 000 ó 255 Pan/Tilt (fast to slow) 4 Red 000 ó 255 0 to 100% 5 Green 000 ó 255 0 to 100% 6 Blue 000 ó 255 0 to 100% 7 White 000 ó 255 0 to 100% 000 ó 015 No function 016 ó 031 Zone macro 1 032 ó 047 Zone macro 2 048 ó 063 Zone macro 3 064 ó 079 Zone macro 4 080 ó 095 Zone macro 5 096 ó 111 Zone macro 6 112 ó 127 Built-in 7 (zone macros 1—6) 128 ó 143 Buil
14-CH Channel 11 12 13 14 Function Shutter cont. Zoom Control Functions Movement Macros Intimidator™ Wash Zoom 350 IRC User Manual Rev.
14-CH Channel 14 (Cont.) Function Movement Macros (Cont.) Intimidator™ Wash Zoom 350 IRC User Manual Rev.
Configuration (Standalone) Use standalone configurations to operate the product without a DMX controller. Never connect a product operating in a standalone mode (Sound, Auto, or IR) to a DMX chain that includes a DMX controller. Products in standalone mode can transmit DMX signals that interfere with the DMX signals from the controller Sound Mode Sound mode sets the product to respond to sounds and music. To set the product to Sound mode, do the following: 1.
IR Mode IR mode allows the product to be controlled with an infrared remote controller. The IRC-6 can remotely set the product to various modes; adjust the color, speed and sensitivity; and set the strobe. To set the product to IR mode, do the following: Make sure the product is plugged into a power source and not connected to a DMX cable. 1. Press
Configuration (Master/Slave) Master/Slave mode allows a single Intimidator™ Wash Zoom 350 IRC (the master) to control the actions of one or more Intimidator™ Wash Zoom 350 IRCs (the slaves) without a DMX controller. In Master/Slave mode the master is set to operate in Auto mode, Sound mode, or IR mode and the slaves are set to operate in Slave mode. The master and slaves are daisy chained though the DMX input and output ports with the master at the beginning of the chain.
Configuration (Settings) The Intimidator™ Wash Zoom 350 IRC can be customized with settings such as for movement, speed, display, and fan operation. Below are instructions for configuring all the settings available. Pan Reverse Reversing the pan movement is useful when 2 lights are facing each other and they both need to turn toward the same direction. To reverse the pan movement do the following: 1. Press
Movement Speed The movement, or pan and tilt speed, can be adjusted and will affect the speed of the Auto and Sound modes. To set the pan and tilt speed, do the following: 1. Press
Display Orientation The display can show the screen in two directions, one for when the fixture is standing and one for when it is mounted upside-down. To set the display orientation, do the following: 1. Press
Sensitivity The sensitivity setting adjusts the sensitivity of the product’s microphone. If the product is not responding to the beat of the music in Sound mode, set the sensitivity to a higher number until the product responds. To adjust the sensitivity setting, do the following: 1. Press
5. TECHNICAL INFORMATION Product Maintenance Dust build-up on the lens reduces light output. Dust build-up on the body and fans can cause overheating and mechanical wear, which can reduce the usable life of the product. To maintain optimum performance and minimal wear in a normal environment, clean the product at least twice a month. If the environment is particularly dusty, clean the product more often.
6. TECHNICAL SPECIFICATIONS Dimensions and Weight Power Length Width Height 10.6 in (270 mm) 7.6 in (194 mm) 14.3 in (363 mm) Note: Dimensions in inches are rounded to the nearest decimal digit Weight 16 lb (7.3 kg) Power Supply Type Range Voltage Selection Switching (internal) Parameter 100 to 240 VAC, 50/60 Hz 120 V, 60 Hz Auto-ranging 230 V, 50 Hz Consumption Operating current 248 W 2.3 A 240 W 1.
RETURNS General Info To return a product or request support: • In the U.S., contact CHAUVET® World Headquarters (see below). • In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). • In Mexico, contact CHAUVET® Mexico (see below). • In any other country, DO NOT contact CHAUVET®. Contact your distributor. See www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland, or Mexico. If you live outside the U.S.
CONTACT US WORLD HEADQUARTERS - CHAUVET® General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.chauvetlighting.com UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.