User Manual
TABLE OF CONTENTS Before You Begin................................................................................................................................. 3 What Is Included...................................................................................................................................................... 3 Unpacking Instructions ............................................................................................................................................ 3 Claims ....
Before You Begin BEFORE YOU BEGIN What Is Included Unpacking Instructions • • • • • • LFS-5D Power cord 4 Framing shutters 4 Metal gobos Warranty Card Quick Reference Guide Carefully unpack the LFS-5D and check that all the parts are in the package, and are in good condition. Claims If the box, or any of the contents, appear damaged from shipping, save all the packaging and file a claim with the carrier immediately.
Before You Begin Product at a Glance Safety Notes Use on Dimmer x Auto Program x Outdoor Use x Auto-Ranging Power Supply x Sound-Activated x Replaceable Fuse P DMX x User-Serviceable x Master/Slave x These notes include important information about the mounting, use, and maintenance of this product. Read these notes before using the product. • • • • • • • • • • • • • • • • • • • • • • Page 4 of 14 Always connect the product to a grounded circuit.
Introduction INTRODUCTION Product Description The LFS-5D is a compact, dimmable LED spot light with framing shutters and a zoom range of 16° to 24°. The LFS-5D comes with 4 metal gobos, and can be used with custom-made gobos of transparent material for colorful projections. Gobo Access Knob and Door Zoom Control Focus Control Gel Frame Bracket Adjustment Knob Mounting Bracket Overview Gel Frame Holder Safety Loop Power In Framing Shutter (x4) Fuse Power Out LFS-5D User Manual Rev.
Introduction 12.5 in 318 mm Dimensions 7.5 in 191 mm 9.5 in 241 mm Page 6 of 14 LFS-5D User Manual Rev.
Setup SETUP AC Power The LFS-5D has an internal auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to Technical Specifications in this manual. The listed current rating indicates the product’s average current draw under normal conditions.
Setup Power Linking Power linking is daisy chaining products together through their Power In and Power Out sockets allowing many products to be powered from one outlet. Up to 23 LFS-5D products can be power linked at 120 V or up to 45 LFS-5D products can be power linked at 230 V. The diagram below illustrates power-linking. Power Source Power Linking Diagram Other LFS-5Ds 1st LFS-5D • • • Mounting 2nd LFS-5D Do not power link more than 23 LFS-5D at 120 V.
Operation OPERATION Gobos Gobos make patterns in the light and can be customized for special events. The LFS-5D uses V size gobos, which are gobos that have a 25.4 mm outside measurement, a 19 mm image size and a 1 mm maximum thickness. The following gobos are included, but any gobo of the correct size can be used. Included Gobos Changing Gobos To change the gobos in the LFS-5D, do the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Turn off and disconnect the product from power.
Operation Gel Frame The LFS-5D has a gel frame so that gel can be used to color the light. The gel frame is 2 flat pieces of plastic with 4 little tabs that snap the pieces of plastic together. The gel goes in between these 2 flat pieces of plastic and the gel frame sits in the gel frame holder at the front end of the light. To place gel into the gel frame, do the following 1. 2. 3. 4. 5. Pull the gel frame out of the gel frame holder. Pry the gel frame apart.
Technical Information TECHNICAL INFORMATION Product Maintenance Dust build-up reduces light output performance and can cause overheating. To maintain optimum performance, clean the product at least twice a month. However, usage and environmental conditions contribute to increasing the cleaning frequency. To clean the product, follow the instructions below: 1. Unplug the product from power. 2. Wait until the product is at room temperature. 3.
Technical Specifications TECHNICAL SPECIFICATIONS Dimensions and Weight Length Width Height Weight 12.5 in (318 mm) 7.5 in (191 mm) 9.5 in (241 mm) 3.2 lb (1.5 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Light Source Input Voltage Range Voltage Selection Voltage Specific 120 V, 60 Hz or 230 V, 50 Hz Fixed Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz Consumption 52 W 56 W Operating current 0.4 A 0.2 A Power linking current (units) 10.4 A (23 units) 10.
Returns RETURNS To return a product or request support: • • • • In the U.S., contact Chauvet World Headquarters. See Contact Us. In the UK or Ireland, contact Chauvet Europe Ltd. See Contact Us. In Mexico, contact Chauvet Mexico. See Contact Us. In any other country, DO NOT contact Chauvet. Contact your distributor. See www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland, or Mexico. If you live outside the U.S.
CONTACT US WORLD HEADQUARTERS - Chauvet General Information Technical Support Address:5200 NW 108th Avenue Voice: (954) 577-4455 (Press 4) Sunrise, FL 33351 Fax: (954) 756-8015 Voice: (954) 577-4455 Email: tech@chauvetlighting.com Fax: (954) 929-5560 World Wide Web www.chauvetlighting.com Toll free: UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd. General Information Technical Support Address:Unit 1C Email: uktech@chauvetlighting.com Brookhill Road Industrial Estate World Wide Web www.chauvetlighting.co.
