User manual

Universal DMX Control (DMX Mode):
This mode allows you to use a universal DMX-512 controller to control laser operations and effects.
1) To control your fixture in DMX Mode use standard
DMX cables to daisy chain your units together
via the DMX connector on the rear of the units. For long cable runs we suggest using a
terminator on the last fixture. For more information about terminators, see page 14.
Mode
Dipswitches
DMX mode 1-9 = DMX address, 10 = Off
2) Assign a DMX address to the unit according to the instructions included with your controller. Also
included is a DMX Quick Referen
ce Chart on page 15
OUT
IN
POWER
1: MASTER
2: SLAVE
3, 4, 5, etc.: SLAVE
OUT
IN
DMX-512
3)
Use a DMX controller to control your units.
LG-40 User Manual 13 11/3/2006/14:01