User Manual
TABLE OF CONTENTS 1. Before You Begin................................................................................3 What Is Included ........................................................................................... 3 Unpacking Instructions .................................................................................. 3 Claims ................................................................................................................... 3 Text Conventions ...............................
1. BEFORE YOU BEGIN What Is Included Unpacking Instructions Claims Text Conventions Icons • • • • • MotionDrape™ LED MotionDrape™ Controller Power Cord Signal Cable Carrying Bag • • • • Replacement LEDs Reusable Zip Ties (Tie Wraps) Warranty Card Quick Reference Guide Immediately upon receipt, carefully unpack this product and check the container to make sure you have received all the parts indicated above in good condition.
Product at a Glance Use on Dimmer Outdoor Use Sound Activated DMX Master/Slave Safety Notes Auto Programs Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle Please read the following Safety Notes carefully before working with this product. They include important safety information about its installation, usage, and maintenance. • • • • • • • • • • • • • • • • • Page 4 of 13 Always connect this product to a grounded circuit to avoid the risk of electrocution.
2. INTRODUCTION Product Overview Front Panel Button Menu LED Display Power In Fuse holder On/Off Switch Top Panel Curtain Input DMX Out DMX In Product Dimensions MotionDrape™ LED User Manual (Rev.
3. SETUP AC Power This product has an auto-ranging power supply and can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for this product (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Mounting Before mounting this product, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual). Orientation The MotionDrape™ LED may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes.
4. OPERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview (page 5) to see the buttons location on the control panel.
Configuration (Standalone) Set this product in one of the standalone modes to control it without a DMX controller. 1. Connect this product to a suitable power outlet. 2. Turn this product on. Never connect a product that is operating in any standalone mode, whether Static, Automatic, or Sound to a DMX string connected to a DMX controller. This is because products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
DMX Channel Assignments and Values 8-CH Page 10 of 13 Channel Function 1 Dimmer 2 Strobe 3 4 5 Red Green Blue 6 Programs 1-15 7 Programs 16-30 8 Speed Value 000 008 000 011 000 000 000 000 016 032 048 064 080 096 112 128 144 160 176 192 208 224 240 000 016 032 048 064 080 096 112 128 144 160 176 192 208 224 240 000 007 255 010 255 255 255 255 015 031 047 063 079 095 111 127 143 159 175 191 207 223 239 255 015 03
5.
Contact Procedure CHAUVET® Contact Information In case you need to return a product or request support, follow the procedure below: • • • If you live in the U.S., contact CHAUVET® World Headquarters (see below). If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below). If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record. Refer to our Web site for contact details of distributors outside the U.S., United Kingdom, or Ireland.
6. TECHNICAL SPECIFICATIONS Dimensions and Weight Length (Drape) 9.8 ft (118 in) 3 m (3,000 mm) Length (Control Box) 9.6 in (243 mm) Width (Drape) Height (Drape) Weight (Drape) Width (Control Box) 6.6 ft (78.7 in) 2 m (2,000 m) Height (Control Box) Weight (Control Box) 5.3 in (135 mm) 2 in (50 mm) 1.8 lbs (0.8 kg) 0.6 in (15 mm) 9.8 lbs (4.4 kg) Note: Dimensions in inches and feet rounded to the nearest decimal digit.