User manual

3. Setup | AC Power
Obey™ 6 User Manual Rev. 1 Page 9 of 22
3.
S
ETUP
AC Power
The Obey™ 6 has an auto-ranging external power supply, that can work with an input voltage range
of 100 to 240 VAC, 50/60 Hz. It runs on 9 VDC, 500 mA.
Before turning on the power, make sure the line voltage is within the range of accepted voltages
as
listed on the label affixed to the product or as described in Technical Specifications.
The listed rating indicates the average current draw under normal conditions.
• Always connect the board to a grounded circuit.
• Never connect the board to a rheostat or dimmer circuit.
Mounting
The Obey™ 6 has openings on either side for rack mounting into a 15” rack and openings in the
back for mounting onto a vertical surface. It can also be placed horizontally on a flat surface.
Mounting
Dimensions
14.8 in (377 mm)
12.9 in (327 mm)
3.1 in
(80 mm)