User manual

Obsession™ LED 2.0 User Manual (Rev. 03) Page 13 of 20
5. T ECHNICAL I NFORMATION
Product
Maintenance
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life. To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean this product, follow the instructions below:
 Unplug the product from power.
 Wait until the product is cold.
 Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
 Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
 Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
 Softly drag any dirt or grime to the outside of the external optics or glass/transparent
surface.
 Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after
cleaning them.