User manual

Setup
-8- OVATION™ C-640FC User Manual Rev. 4
Mounting
Before mounting this product, read and follow the Safety Notes.
Orientation
Always mount this product in a safe position. The OVATION™ C-640FC may be
mounted in any position; however, make sure there is adequate room for ventilation
,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in
the Safety Notes
.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications
for the weight-bearing
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable.
Procedure
The OVATION™ C-640FC comes with two omega brackets to which you can attach
mounting clamps.
You must supply your own clamps and make sure that they are
capable of supporting the weight of this product. You will have to use two mounting
points per product.
Mounting Diagram
Overhead Mounting
Omega
Brackets
(x2)
Mounting Clamps
(such as the CLP-15 or CLP-15N
clamp from Chauvet)
Safety Cable
(such as the CH-05 cable
from Chauvet)
Floor Mounting
Adjustment
Knobs
Handles
(x2)