User manual

Operation
OVATION™ C-640FC User Manual Rev. 4 -23-
Dimming Profiles
Select the dimming profile of the OVATION™ C-640FC by selecting the DIMX
programming level.
1. Go to the SET main level.
2. Select the DIMX programming level.
3. Select a dimming program
DIM1
–
DIM4
(fast to slow) or
OFF
(linear output).
Control Panel Lock
This setting enables you to activate or deactivate the control panel lock, which keeps
non-authorized personnel from changing the product’s settings.
1. Go to the SET main level.
2. To to the KEY programming level.
3. Select either ON (activate) or OFF (deactivate).
When the control panel lock is activated, after 30 seconds of control panel inactivity
or after turning on the product, the product will prompt you to enter the passcode.
Passcode
After being prompted to enter the passcode:
• Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Note: Asterisks (*) appear on the display when entering the passcode.
Passcode can not be changed.
Menu Access Lock
This setting enables you to activate or deactivate the menu access lock. Activating the
menu access lock prevents non-
authorized personnel from making any changes to the
programming levels under the SET main level.
1. Go to the SET main level.
2. Go to the SLCK programming level.
3. Select either ON (activate) or OFF (deactivate).
When the menu access lock is activated, in order to access the SET programming
levels, the product will prompt you to enter the passcode. Enter the passcode
as
described in Passcode.
Setting Color Balance
Color balance settings allow you to select the output as follows.
1. Go to the SET main level.
2. Go to the COLR programming level.
3. Select OFF (maximum output), RGBW (balanced white),
or UC (universal color balance).
Strobe Options for
TOUR and TR16
The strobe behavior displayed in the TOUR and TR16 personalities is set to either
classic or special. Classic strobe allows DMX control to
select 1 to 20 Hz, while special
strobe exhibits different strobe behaviors according to the D
MX value selected (for
details, see TOUR or TR16 DMX Values).
To select the strobe option, follow the
instructions below.
1. Go to the SET main level.
2. Go to the STRB programming level.
3. Select either
SPEC
(special) or
CLAS
(classic).