User manual

Operation
-24- OVATION™ C-640FC User Manual Rev. 4
Color Macros and
White Settings
These settings allow you to select and edit the temperature of the white colors used in
the macros when in Channel 8 of the TOUR mode or Channel 14 of the TR16 mode.
1. Go to the CAL main level.
2. Enter the passcode as described in Passcode
.
3. Go to CAL1.
4. Select a white color (WH.01–WH.11).
5. Select a color RED (red), GREN (green), BLUE (blue), WHIT (white),
or AMBE (amber).
6. Select a color value (X.000–X.255).
7. Repeat for the other colors.
White Calibration
This setting allows you to select the white color shown by the OVATION™ C-640FC
when the color setting is RGBW and the DMX controller’s red, green, and b
lue faders
are set to 255.
1. Go to the CAL main level.
2. Enter the passcode as described in Passcode
.
3. Go to CAL2.
4. Select a color RED (red), GREN (green), or BLUE (blue).
5. Select a color value (X.000–X.255).
6. Repeat for the other colors.
When setting the white calibration (CAL2), you will only be able to define the red,
green, and blue values.
Resetting the CAL
Settings
To return the settings in CAL1 and CAL2 of the OVATION™ C-640FC to the factory
defaults, follow the instructions below.
1. Go to the CAL main level.
2. Enter the passcode as described in Passcode
.
3. Go to the CALR programming level and then the display becomes blank.
4. Enter the passcode as described in Passcode
.