User manual

Operation
OVATION™ C-640FC User Manual Rev. 4 -25-
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
• Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (static, auto,
or customizable programs
) to a DMX string connected to a DMX controller.
Products in standalo
ne mode may transmit DMX signals that could interfere
with the DMX signals from the controller.
Static Mode
To create a custom static color and select a strobe frequency, do the following:
1. Go to the STAT main level.
2. Go to the RED (red), GREN (green), BLUE (blue), WHIT (white), AMBE (amber),
STRB (strobe frequency) programming levels.
3. Select the desired value for the programming levels as follows.
• X.000–X.255 (0–100%) for each color
• S.000–S.020 (0–20 Hz) for strobe frequency
Auto and Customizable
Programs
To enable the auto and customizable programs, follow the instructions below:
1. Go to the AUTO main level.
2. Select an auto program AT.01–AT.10 or a customizable program PR.01–PR.10.
3. With the auto programs, also select the auto program speed P.000–P.255.
You cannot edit any of the auto programs (AT.01–AT.10); however, you can edit
the custom programs (PR.01–PR.10). See Edit Custom Programs
for details.
Selecting from the
Virtual Color Wheel
The OVATION™ C-640FC offers over thirty pre-mixed colors based on Rosco gel
colors. To select a Rosco gel color, do the following.
1. Go to the VCW main level.
2. Select the desired Rosco color (C90Y, R11, R312, R03, R18, R20, R21, R26,
R27, R33, R337, R38, R41, R42, R44, R349, R54, R64, R364, R65, R80, R81,
R82, R382, R83, R383, R91, R92, R93, R393,or R90).
See the Color Chart
section for details on specific values.