User manual

Operation
-26- OVATION™ C-640FC User Manual Rev. 4
Edit Custom Programs
This setting allows the programming of up to 30 scenes for each of the 10
customizable programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired custom program PR.01–PR.10.
3. Select the desired scene SC.01–SC.30.
4. Go to the RED (red), GREN (green), BLUE (blue), WHIT (white), AMBE (amber),
STRB (strobe frequency), TIME (step duration), and FADE (fade duration)
programming levels.
5. Select the desired value for the programming levels as follows.
• X.000–X.255 (0–100%) for each color
• S.000–S.020 (0–20 Hz) for strobe frequency
• T.000–T.255 (slow to fast) to define the step duration
• F.000–F.255 (slow to fast) to define the fade duration
6. Repeat for the other colors or effects.
7. Return to the scene programming level (SC.01–SC.30).
8. Repeat the setting of colors and effects for the other scenes.
Do not disconnect the product from power before completing the editing
process. Make sure to complete all steps when editing custom programs;
otherwise, the OVATION™ C-640FC may lose any incomplete custom
programming.
Reset
To reset the OVATION™ C-640FC to the factory default settings, follow the
instructions below.
1. Go to the SET main level.
2. Select the REST programming level and then the display becomes blank.
3. Enter the passcode as described in Passcode
. After successfully entering the
passcode, REST blinks on the display during the reset process.
4. OK appears on the display when finished.