User Manual *Lens tubes sold separately
Edition Notes Edition Notes The OVATION™ E-190WW User Manual Rev. 3 covers the description, safety precautions, installation, programming, operation, and maintenance of the OVATION™ E-190WW. CHAUVET® released this edition of the OVATION™ E-190WW User Manual in March 2014. Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet).
Table of Contents Table of Contents 1. Before You Begin ...................................................................................................................................... 1 What is Included ........................................................................................................................................................... 1 Claims ........................................................................................................................................
Table of Contents 5. Technical Information ............................................................................................................................. 15 Product Maintenance .................................................................................................................................................. 15 Cleaning the Reflector Housing Lens .....................................................................................................................................
Before You Begin 1. Before You Begin What is Included Claims • OVATION™ E-190WW • Neutrik® powerCON® power cord • Gel Frame (6.25 in/159 mm accessories) • Safety Cable • Warranty Card • Quick Reference Guide Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition.
Before You Begin Product at a Glance Use on Dimmer Outdoor Use Sound-Active DMX Master/Slave Safety Notes Personal Safety Mounting and Rigging x x x P P Auto Programs Auto-Ranging Power Supply Replaceable Fuse User-Serviceable Duty Cycle x P P x x Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product. This product contains no user-serviceable parts.
Introduction 2. Introduction Description Features Lens Tube The OVATION™ E-190WW delivers an excellent white light with a warm color temperature and a beautiful flat field. It also features standard beam shaping shutters, a gobo/effect slot and lens barrels that are interchangeable with other popular ERS fixtures. Selectable dimming curves ensure smooth fading cues that intermix well with the output of conventional theatre ellipsoidals.
Introduction Pattern Holder Slot (A-size holder for 3-in patterns B-size holder for 2.5-in and 2.75-in patterns, sold separately) Framing Shutter (x 4) Overview Barrel Rotation Knobs Beam Focus Knobs Drop-in Iris Slot Gel Frame Holder Side View Reflector Housing Barrel Assembly Lens Tube (sold separately) Handle Menu Buttons Fuse Holder Display powerCON® Input 3- and 5-pin DMX In powerCON® Output 3- and 5-pin DMX Out Rear View -4- OVATION™ E-190WW User Manual Rev.
Introduction Dimensions Side View 20.9 in 530 mm 6.7 in 171 mm 8.7 in 222 mm 15 in 380 mm 7.1 in 180 mm 12 in 305 mm 25.4 in 645 mm Top View 6.25 in 159 mm OVATION™ E-190WW User Manual Rev. 3 6.
Setup 3. Setup AC Power Each OVATION™ E-190WW has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for each OVATION™ E-190WW, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual. The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website www.
Setup Power Linking The OVATION™ E-190WW supports power linking. You can power link up to 4 units on 120 V; up to 7 units on 208 V; or up to 8 units on 230 V. This product comes with a Neutrik® powerCON® input power cord. This product does not come with a power linking cable; however, a power linking cable is available as an option. DMX Linking You can link the OVATION™ E-190WW to a DMX controller using a standard DMX serial connection.
Setup Mounting Before mounting this product, read and follow the Safety Notes. Orientation Always mount this product in a safe position. The OVATION™ E-190WW may be mounted in any position; however, make sure there is adequate room for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends using the following general guidelines when mounting this product.
Operation 4. Operation Control Panel Description Button Function
Operation Menu Map Main Level Programming Levels DIM D.000–D.100 RUN ADDR Description Selects the amount of light output (0–100%) DMX Receives DMX signals from the DMX controller SLAV Receives DMX signals from the master D.001–D.
Operation DMX Values UNO Channel 1 DOS Channel 1 2 STD.
Operation Dimmer - Menu To adjust the light output of the OVATION™ E-190WW, select the dimmer setting as Control follows. 1. Go to the DIM main level. 2. Select the desired dimmer setting D.000–D.100 (0–100% light output). Dimmer Speeds Select the dimmer speed of the OVATION™ E-190WW by selecting the DIMX programming level. 1. Go to the SET main level. 2. Select the DIMX programming level. 3. Select a dimmer speed DIM1–DIM4 (fast to slow) or OFF (linear output).
Operation Reset To reset the OVATION™ E-190WW to the factory default settings, follow the instructions below. 1. Go to the SET main level. 2. Select the REST programming level and then the display becomes blank. Enter the passcode as described in Passcode. After successfully entering the passcode, REST blinks on the display during the reset process. 3. OK appears on the display when finished.
Operation Master/Slave Mode The Master/Slave mode allows a single OVATION™ E-190WW (the “master”) to control the actions of one or more OVATION™ E-190WW units (the “slaves”) without the need of a DMX controller to control the slaves. The master will be set to operate in Master mode (MAST), while the slaves will be set to operate in Slave mode (SLAV). Once set and connected, the slaves will operate in unison with the master. Configure the units as indicated below. The Slaves: 1. 2. 3. 4.
Technical Information 5. Technical Information Product Maintenance Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and mechanical wear. To maintain optimum performance and minimize wear, clean this product at least twice a month. However, usage and environmental conditions contribute to increased cleaning frequency. To clean your product, follow the instructions below. • Unplug the product from power.
Technical Information Technical Specifications Dimensions and Weight (fixture only) Length Width Height Weight 21.5 in (545 mm) 15 in (380 mm) 15 in (380 mm) 16.4 lb (7.44 kg) Note: Dimensions in inches rounded to the nearest decimal digit.
Returns You must send the product prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags. Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
