User manual

Introduction

Q-Spot & Q-Spot 150 User Manual 9 2005-11-15/13:11

Mounting

Orientation

Both fixtures can sit on stage or be mounted on a truss using a clamp in any position, provided, there

is adequate room for ventilation.

Warning

It is important never to obstruct the fan or vents pathway.

 When selecting installation location, take into consideration lamp replacement access and routine

maintenance.

 Safety cables should always be used.

 Never mount in places where the fixture will be exposed to rain, high humidity, extreme

temperature changes or restricted ventilation.

 The fixture must have a minimum of 1 meter distance from combustible materials.

Rigging

Both fixtures include a mounting plate to which a bracket and 1 rigging clamp can be bolted.

1. Align the mounting bracket with the screws at the bottom of the base, insert screws and tighten.

2. Verify the structure can hold 10 times the weight of all to-be installed fixtures.

3. From a stable platform, attach a clamp to the bracket. Depending on your particular clamp, it may

be necessary to attach clamp to bracket before mounting bracket to plate.

1. Clamp

2. Safety cable

3. Mounting plate