User manual

Operation
January 30, 2012 -11- Q-Spot 260-LED User Manual Rev. 02
Range Limitation
1) Go to MENU > RANGE > P/START
2) Select the starting point for the limited pan (000~255)
3) Go to MENU > RANGE > P/FINISH
4) Select the finishing point for the limited pan (000~255)
5) Go to MENU > RANGE > T/START
6) Select the starting point for the limited tilt (000~255)
7) Go to MENU > RANGE > T/FINISH
8) Select the finishing point for the limited tilt (000~255)
9) Go to MENU > RANGE > USE
10) Select YES to activate the new settings or NO to stop using them.
Move-in Black
1) Go to MENU > SPECIAL > BLACK
2) Select YES to enable the 3 seconds delay or NO to make the blackout immediate.
Reset Control
1) Go to MENU > SPECIAL > RESET
2) Select DMX to enable the DMX controller to reset the fixture (Control function) or
NO to reset the fixture only from the control panel.
System Default
1) Go to MENU > DEFAULT > DEFAULT
2) Select YES to default the fixture to its original factory settings.