User manual

Operation
-18- Q-Wash™ 436Z-LED User Manual Rev. 2
Menu Map (cont.)
Main Level Programming Levels Description
SETTINGS
(cont.)
PERFORM
(cont.)
DIM INVERT
NORM
Defines the direction of the dimmer fader
INVERT
DMX ERROR
SAVE
Continues with last command upon loss of
DMX control
BLACK
Blacks out fixture upon loss of DMX signal
DMX RESET
DMX
The DMX controller resets the product
DISPLAY
The control panel resets the product
DISPLAY ON
LONG
Determines how long the backlight of the
display will stay on after last command button
pressed
SHORT
ALWAYS
HOME SCREEN
DMX
Displays DMX address
NAME
Displays what is programmed via SERVICE >
CONTENT level
DISPLAY
INVERT
NORM
Allows the display on the control panel to be
inverted
INVERT
RANGE
P.START
000~255
Sets the pan start point(pan range)
P.END
Sets the pan end point (pan range)
T.START
Sets the tilt start point (tilt range)
T.END
Sets the tilt end point (tilt range)
USE
NO
Activates the changes
YES
DISPLAY LOCK
OFF
Activates/deactivates the main level passcode
ON
DEFAULT
NO
Resets fixture to factory default settings
YES
SEND
NO
Sends ALL settings of the 1st product to all
other Q-Wash 436Z LEDs connected to the
DMX output
YES