User manual

Operation
-10- Rogue™ R1 Spot User Manual Rev. 5
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Rogue™ R1 Spot starting address in the 001–512 DMX range. This
enables control of up to 26 products in the 19-channel 19CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
• To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
• To highlight a menu option or to change a setting, press <UP> or <DOWN>.
• To change menu levels as shown in the Menu Map
, press <ENTER> or <MENU>.
This is equivalent to moving right and left of the Menu Map, respectively.
• To accept the current or new value, press <ENTER>.
• To return to the previous menu without making changes, press <MENU>.
• To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
screen will automatically revert to the opening screen.