User Manual
TABLE OF CONTENTS 1. Before You Begin................................................................................3 What Is Included ........................................................................................... 3 Unpacking Instructions .................................................................................. 3 Claims ................................................................................................................... 3 Text Conventions ...............................
1. BEFORE YOU BEGIN What Is Included • • 1 x Intimidator™ Spot LED 350 1 x Power Cord • • 1 x Warranty Card 1 x Quick Reference Guide Unpacking Instructions Immediately upon receipt, carefully unpack the product and check the container to make sure you have received all the parts indicated above in good condition.
Product at a Glance Use on Dimmer Outdoor Use Sound Activated DMX Master/Slave Safety Notes Auto Programs Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.
2. INTRODUCTION Product Overview Safety Loop Power Out Power In Control Panel and Button Menu DMX Out DMX In Fuse Holder Intimidator™ Spot LED 350 User Manual (Rev.
Product Dimensions Page 6 of 19 Intimidator™ Spot LED 350 User Manual (Rev.
3. SETUP AC Power The Intimidator™ Spot LED 350 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Power Linking The product provides power linking via the IEC outlet located in the back of the unit. Please see the diagram below for further explanation. 1st Product Power Linking Diagram 2nd Product 3rd Product Other products You can power link up to 3 Intimidator™ Spot LED 350 units on 120 VAC or up to 7 Intimidator™ Spot LED 350 units on 230 VAC.
Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual). Orientation The Intimidator™ Spot LED 350 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging Mounting Diagram • Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
4. OPERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.
Configuration (DMX) Set the product in DMX mode to control with a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. 3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. Starting Address When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
DMX Channel Assignments and Values 14-CH Page 12 of 19 Channel Function Value Setting 1 Pan 000 255 0-540° 2 Fine Pan 000 255 Fine control of panning 3 4 5 Tilt Fine Tilt Speed 6 Color Wheel 000 000 000 000 007 014 021 028 035 042 049 056 064 071 078 085 092 099 106 113 120 128 255 255 255 006 013 020 027 034 041 048 055 063 070 077 084 091 098 105 112 119 127 191 7 Gobo Wheel 064 072 080 088 096 104 112 120 128 192 071
14-CH (con’t) Channel Function 8 Gobo Rotation 9 Prism 10 11 Focus Dimmer 12 Shutter 13 Control Functions 14 Movement Macros Intimidator™ Spot LED 350 User Manual (Rev.
8-CH Page 14 of 19 Channel Function Value Setting 1 Pan 000 255 0-540° 2 Tilt 000 255 0-270° 3 Color Wheel 000 007 014 021 028 035 042 049 056 064 071 078 085 092 099 106 113 120 128 192 006 013 020 027 034 041 048 055 063 070 077 084 091 098 105 112 119 127 191 255 White Yellow Pink Green Red Light Blue Kelly Green Orange Dark Blue White + Yellow Yellow + Pink Pink + Green Green + Red Red + Light Blue Light Blue + Kelly Green Kelly Green + Orange
Configuration (Standalone) Set the product in one of the standalone modes to control without a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any standalone mode (either Automatic or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
Master/Slave Mode The Master/Slave mode allows a single Intimidator™ Spot LED 350 unit (the “master”) to control the actions of one or more Intimidator™ Spot LED 350 units (the “slaves”) without the need of a DMX controller. The master unit will be set to operate in either Automatic or Sound Active mode, while the slave units will be set to operate in Slave Mode. Once set and connected, the slave units will operate in unison with the master unit. Configure the units as indicated below. Slave units: 1.
5. TECHNICAL INFORMATION Product Maintenance Dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life. To maintain optimum performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below: • Unplug the product from power.
In case you need to return a product or request support, follow the procedure below: • • Contact Us If you live in the US, contact CHAUVET® World Headquarters. If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. World Headquarters CHAUVET® General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.
6. TECHNICAL SPECIFICATIONS Dimensions and Weight Length Width Height Weight 10.6 in (268 mm) 13.4 in (340 mm) 15.4 in (392 mm) 22.7 lbs (10.3 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Light Source Photo Optic Thermal DMX Ordering Power Supply Type Range Voltage Selection Switching (internal) 100~240 V, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 230 V, 50 Hz Consumption 272 W 285 W Operating 2.2 A 1.