Technical Specifications Power Fuse AC 120V 60Hz AC 230~250V 50/60Hz 20mm Glass 10A Fast Blow 20mm Glass 10A Fast Blow Lamps Dimension Weight MSD 250W (2000hrs) 560mm x 250mm x 205mm / 22in x 9.8in x 8.1in 17 kg / 37.4 lbs 13.5 kg / 29.7 lbs TRACKSCAN 250R DMX-606R User Guide Please read these instructions carefully before use User Information (Please complete for your records) Data Purchased : / / Serial No.
TABLE OF CONTENTS 1. Safety Instruction 2. Technical Specification 2.1 Inserting / Exchanging rotating gobos 3. Lamp 3.1 How to change the frequency 50Hz / 60Hz 4. How To Set The Unit 4.1 Control Panel 4.2 Main Function 5. How To Control The Unit 5.1 Master/Slave Built-In Preprogrammed Function. 5.2 Easy Controller 5.3 Universal DMX Controller 5.4 DMX512 Configuration 5.5 DMX512 Connection 7. Fixture Cleaning 6. Troubleshooting 7.
l l EC Declaration of Conformity l l l We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
E. One of the channels is not working well 1. The stepper motor might be damaged or the cable connected to the PCB is broken. 2. The motor’s drive IC on the PCB might be out of condition. F. The lamp is cutting out intermittently 1. The lamp is not working well. Check the main voltage either too high or too low. 2. Internal temperature may be too high. Check and if necessary replace the fan on the head. 5.5 DMX512 Connection 6.
7. 3 pin XLR connectors are more popular than 5 pin XLR. 3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) 2. Technical Specification Power supply - AC 120V~60Hz - AC 230/240/250V~50/60Hz Lamp - Discharge MSD 250W or NSD 250W GY 9.5 Optical system - Standard 13° focused beam angle. - Focus can be adjusted by manual. Shutter - Blackout, dimmer and strobe speed variable(1~12 flashes per second).
245 Stopped 00-09 Blackout 00-07 White 00-12 White-Blue 07-13 White 00-06 Shaking 5.2 Easy Controller 168~247 Slowest speed 128 Slowest speed 128 135 Stopped 121-134 120 112-127 Shutter Light green 116-127 Amber 103-115 Magenta 90-102 96-111 88-167 Pink 77-89 80-95 The easy remote control is used only in master/slave mode.
Lamp : Discharge lamp MSD 250W Color Temperature : 8000K Average Life : 2000 hours 1. Always switch off the main supply and never handle the lamp or luminaries when is hot. 2. Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured alcohol and wipe it with a lint free cloth before installation. 3. The lamp generates UV radiation. Never operate the lamp without appropriate shielding. 4.
DMX512 Address Setting Show Mode " Show 1 " Show Mode " Show 2 " Slave Mode " Normal " Slave mode " 2 Light Show 2 " Normal Color Split Color Pan Normal Pan Inversion Tilt Normal Tilt Inversion Display Normal Display Inversion . Self-Test is blinking on the display. Pressing Press the MENU button up to when the ENTER button and the unit will run self-test by built in program. To go back to the functions press the MENU button again. MENU Fixture Hours is blinking on the display.
button to setup or automatically return to the main functions without any change after 8 seconds. To go back to the functions without any change press the MENU button again. Display normal mode for the fixture putting on the floor. Display inversion mode for the fixture fixing under ceiling. Slave Mode Press the MENU button up to when the Focus Adjust is showing on the display. Pressing is blinking on the display.