User manual

Setup
10 Xeno™ 2500 User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the
product’s weight. Refer to the Technical Specifications chart for the weight-bearing
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable.
Product Mounting Diagram
The Xeno™ 2500 comes with an already installed mounting bracket to which you will be
able to attach clamps for hanging.
You must supply your own clamps and insure they are
capable of supporting the weight of this product
. In addition, you will have to use a safety
cable to link the product to the structure.
Overhead Mounting