User Manual

15
4.5.5. DISPLAY
By clicking , then opening to the Luxmeter tab, you can modify the display of the measurements on the instrument in the same
way as by pressing the SRC key, or the UNIT key.
4.5.6. READING THE RECORDS
The Data Logger Transfer software lets you read the records made. Click Recorded Sessions under the name of your instrument
to obtain a list of the records.
4.5.7. EXPORTING RECORDS
Once the list of the records is displayed, choose the one you want to export and convert it into a word-processing document (docx)
or a spreadsheet (xlsx), in order to be able to use it in the form of reports or curves.
It is also possible to export the data to the DataView application software (see §1.2).
4.5.8. REAL-TIME MODE
Click Real-time data under the name of your instrument to see the measurements being made on the instrument as they are made.
4.5.9. FORMATTING THE MEMORY OF THE INSTRUMENT
The internal memory of the instrument is already formatted. But if there is a problem (if it becomes impossible to read or to write),
it may be necessary to reformat it (in Windows).
In this case, all of the data will be lost.