Brochure

1
The C.A 5000 Series
of multimeters:
for analogue fans
Connection with positive safety
It is essential to disconnect the leads before opening
the cover for access to the battery and the fuses.
Rapid opening by 1/4 turn screw, using a coin or a
screwdriver.
2
2
3
4
5
3
4
5
SAFETY ACCESSORIES
Numerous accessories*
are available to extend your
multimeter’s applications or to
give it new functions:
crocodile clips, wire grips,
voltage probes, current clamps,
temperature probes…
Documentation on request.
* compliant with standard
IEC 61010--031
Sélection d’Accessoires
Selected Accessories
“Fus” light
Test of the HRC fuses during current
measurement.
Analogue scale
With antiparallax mirror
for voltage scales.
C.A 5000 series
Analogue multimeters
Ø 4 mm safety
input terminals
"Voltest
TM
" light
Indicates the presence of voltage on
resistance measurement and continuity test.
Double isolation
In accordance with standard
IEC 61010-1, rated voltage 600 V,
installation category III, degree of
pollution 2.
We have developed a range of multimeters
to meet all the measurement requirements of
today’s electricians and electrical engineers.
◗ To meet the electrical safety requirements,
they are totally proetected and comply with
the IEC 61010-1 standard, Category III 600 V.
◗ With their shockproof case equipped with the
multi-purpose “Multistand
TM
” accessory, they
can be used both on the work site and in the
laboratory.
◗ Lightweight and compact, they are easy to
handle.
◗ Their current ranges are protected by HRC
(high rupture capacity) fuses with indication of
the condition of the fuses by “Fus” light.
◗ For the C.A 5003 and C.A 5005 the ohmmeter
zero reset is automatic. To avoid any error in
use, the “Voltest
TM
” light indicates the presence
of a voltage during resistance and continuity
tests.