Brochure

Serie MN
Pinces ampèremetriques pour courant AC
Non-contractual document
906131102E - Ed 1
5.01 (1/1)
D
N
series
ELECTRICAL SPECIFICATIONS
•
Current range:
1 AAC .. 2,400 AAC
(3,000 A for temperature < 35 °C)
•
Current transformation ratio:
3000:1
•
Output signal:
0.333 mA / AAC (1 A to 3,000 A)
•
Accuracy and phase shift
(1)
:
Primary current 150 A 600 A 3,000 A
% Accuracy of
output signal
1.5 % 0.75 % 0.5 %
Phase shift 1.5° 0.75 ° 0.5 °
•
Overload:
3600 A for 5 minutes
•
Maximum output voltage (secondary open):
Electronic protection circuit limiting voltage
to 42V peak max.
•
Accuracy:
In accordance with IEC185-26-27, 5 VA, class0.5
from 48Hz to 1,000Hz
•
Bandwidth:
30 Hz to 5 kHz (in continuous use above 1 kHz, the
max. measurement current is limited)
•
Ampere second product:
90 A.s
•
Load impedance:
< 5 Ω
•
Operating voltage:
600V AC
•
Common mode voltage:
600V AC
•
Infl uence of adjacent conductor:
0.005 A / AAC
•
Infl uence of conductor position in jaws:
1 % ± 0.1 A
MECHANICAL SPECIFICATIONS
•
Operating temperature:
-10 °C to +50 °C
•
Storage temperature:
-25 °C to +80 °C
•
Infl uence of temperature:
< 0.1 % per 10 °K
•
Max. jaw opening:
90mm
•
Max. jaw insertion capacity:
Cable: 64mm
Group of wires: 50 x 135mm - 64 x 100mm
•
Casing protection rating:
IP20 in accordance with IEC 529
•
Drop test:
500mm (IEC68-2-32)
•
Shock resistance:
100 g, in accordance with IEC68-2-27
•
Vibration resistance:
10 / 55/10 Hz, 0.15mm test in accordance with
IEC68-2-6
•
Self-extinguishing capability:
Casing: UL94 V0
Jaws: UL94 V2
•
Dimensions:
120 x 315 x 48mm
•
Weight:
1,200 g
•
Colour:
Dark grey casing with red jaws
•
Output:
- D30
N
: two safety sockets (4mm)
- D30C
N
: two-wire 1.5 m cable with reinforced
insulation or double insulation ending with
2elbowed 4 mm male safety plugs
(1) Conditions of reference: 23 °C ± 5 °K, 20 % to 75 % RH, 48Hz to 65Hz, external magnetic fi eld < 40 A/m,
no DC component, no current-carrying conductor nearby, centred test sample, load impedance 5 Ω.
SAFETY SPECIFICATIONS
•
Electrical safety:
Double insulation or reinforced insulation between
the primary and the secondary circuits and the
outside casing in accordance with IEC 1010-2-032.
- 600V category III, pollution degree 2
- 300V category IV, pollution degree 2
•
Electromagnetic compatibility (EMC):
EN50081-1: classB
EN50082-2:
- Electrical discharge: IEC1000-4-2
- Radiated field: IEC 1000-4-3
- Fast transients: IEC1000-4-4
- Magnetic field at 50/60 Hz: IEC1000-4-8
Current
2,400 AAC
Ratio
3000:1
Output
0.333 mA / A
To order Reference
AC current clamp model D30N with operating manual P01120049A
AC current clamp model D30CN with operating manual P01120064
Current clamps for AC current
Models D30N and D30CN