Brochure

ManualsBrandsChauvin Arnoux ManualsCurrent / Clamp Test ProbesCurrent Probe, 1 mA ... 4.5 A,

Serie MN

Pinces ampèremetriques pour courant AC

Non-contractual document

906131102I - Ed 1

9.00 (1/2)

K series

K SERIES

The K series is a new product range with exceptional measurement

capabilities.

Extremely compact in design, these “micro-probes” are designed for

highly accurate measurement of very low currents.

Their small dimensions and shape make them ideal for probing into tight

spaces where access is limited, as is the case on most switchboards,

4-20A process loops or vehicle wiring looms for example.

These “K” series current probes make excellent work companions for

multimeters and any other instrument able to make use of their high

sensitivity, dynamic range and ability to indicate the shapes of signals

and wavefo

RMS

They give an AC+DC output signal that is proportional to the measured

current, without needing to change the range or ﬁ lter the signal. RMS

measurements are possible with DC+AC components.

There are two different types of K series current probes available.

Model K1 gives a 1 mV/mA output and lends itself to a variety of different

applications, oriented towards low-current measurement.

Model K2 has a greater level of sensitivity with its 10 mV/mA output.

AC/DC current probes

Summary of content (4 pages)

PAGE 1
Pincescurrent AC/DC ampèremetriques probes pour courant AC Serie K series MN K SERIES The K series is a new product range with exceptional measurement capabilities. Extremely compact in design, these “micro-probes” are designed for highly accurate measurement of very low currents. Their small dimensions and shape make them ideal for probing into tight spaces where access is limited, as is the case on most switchboards, 4-20 A process loops or vehicle wiring looms for example.
PAGE 2
Pincescurrent AC/DC ampèremetriques probes pour courant AC Serie K series MN Ø 3.9 mm max 111 mm 124 mm • • 64 mm Non-contractual document 906131102I - Ed 1 25 mm 9.
PAGE 3
AC/DC current Pinces ampèremetriques probe pour courant AC Model K1 Current 4500 mA DC 3000 mA AC Output 1 mV / mA Serie K series MN DESCRIPTION The K1 model measures currents as low as 100 μA AC or DC. The clamp provides a proportional output signal enabling direct readings on multimeters. ELECTRICAL SPECIFICATIONS • Current calibres: 1 mA DC .. ± 4.5 A DC 1 mA RMS .. 3 A RMS (sinusoidal) 1 mA .. 4.
PAGE 4
AC/DC current Pinces ampèremetriques probe pour courant AC Model K2 Current 450 mA DC 300 mA AC Output 10 mV / mA Serie K series MN DESCRIPTION The K2 model measures currents as low as 100 μA AC or DC. The probe has a proportional output for direct readings on multimeters. ELECTRICAL SPECIFICATIONS • • • • Current calibres: 0.1 mA DC .. ± 450 mA DC 0.1 mA RMS .. 300 mA RMS (sinusoidal) 0.1 mA peak ..