C.A C.A C.A C.A 8331 8333 8336 8435 The experience of the Qualistar, ensuring high performance POWER AND ENERGY QUALITY ANALYSERS IEC 61000-4-30 IEC 61010 1000 V CAT III 600 V CAT IV Measure all the necessary voltage, current and power parameters for full diagnosis of an electrical installation. Capture and record all the parameters, transients, alarms and wave forms simultaneously. Proven simplicity of use.
Qualistar+ Range Designed for inspection and maintenance teams in industrial or administrative buildings, the Qualistar can provide a snapshot of the main electrical network quality characteristics. Easy to handle and precise, these instruments also offer a large number of calculated values and several processing functions.
Power and energy quality analysers Functions Flicker Harmonics Power values & cos φ R.
Qualistar+ Range Functions Connections The Qualistar models are ideal for applications on all types of electrical networks, from the simplest to the most complex: • Single-phase, split-phase and three-phase with or without neutral • All types of 2, 3, 4 and 5-wire electrical networks • 2-wattmeters method • ARON • 2 ½ elements… Longer Inrush… over 10 minutes! The Inrush current corresponds to the maximum input current drawn by an electrical device when it is powered up.
Power and energy quality analysers Energy values, including Tonnes Oil Equivalent The Qualistar models measure energy. This mode displays all the values relating to power and energy. • “Start” and “Stop” keys to activate and deactivate summing of the energy values. • A new feature is the wide variety of units available: kW, Joule, nuclear toe, non-nuclear toe, BTU, etc Calculation of K factor for transformers The harmonic currents flowing in a network lead to increased losses in the windings.
Qualistar+ Range Configuration Languages sers enter the instrument’s general parameters U directly (date and time, display contrast, colour, etc.). The menus, help screens and pop-ups are translated into all the languages. They select the type of network to which the Qualistar is connected. They configure the measurement and recording parameters. Display Ratios and sensors When they are connected, the current sensors are recognized automatically by the Qualistar.
Power and energy quality analysers Display View the characteristics of a network instantaneously View all the channels simultaneously! OBSERVATION Graphics The Qualistar models allow you to view all the inputs simultaneously. The measurements are displayed as waveforms; values or Fresnel diagrams. DIAGNOSTICS THD PHASE BY PHASE Harmonics mode Global THD and per phase on U, I, V and VA in % and RMS value, phase offset of harmonics. They offer the expert mode for the Harmonics function.
Qualistar+ Range Monitor everything, Configuration Recording mode • More than 450 recordable values with all the required parameters and graphic display. • Programmable recording period and storage rate. New! Quick start-up: • Immediate start of recording • Automatic indication of Min/Max values • Auto-completion of measurement campaign names Alarms mode • Up to 40 alarms can be set simultaneously! • Threshold overruns to be monitored can be configured during set-up.
Power and energy quality analysers with more parameters Acquisition in progress Analysis During acquisition: Operation of several modes in parallel, Possibility of viewing the data during a campaign. Users can view all the parameters, so they can be checked at any time.
Special all-terrain NEW C.A 8435 A rugged, waterproof C.A 8435, the special Qualistar+ for all conditions and all seasons! IP Indoor and outdoor use, including in the rain 5 voltage inputs, 4 current inputs Continuous, simultaneous recording of all the parameters Monitoring with alarms All installation types 67 Specific caps have been developed to ensure maximum waterproofing for the C.A 8435 analyser.
Accessories and software ACCESSORIES Model MN93 MN 93A MA193 PAC93 A196-450 A193-450 A193-800 C193 E3N Measurement range 500 mA to 200 Aac 0.005 Aac to 100 Aac 100 mA to 10 kAac 1 A to 1,000 Aac 1 A to 1,300 Adc 100 mA to 10 kAac 100 mA to 10 kAac 1 A to 1,000 Aac 50 mA to 10 Aac/dc 100 mA to 100 Aac/dc Clamping Ø / length 20 mm 20 mm Ø 70 mm / 220 mm 1 x Ø 39 mm 2 x Ø 25 mm Ø 140 mm / 450 mm Ø 250 mm / 800 mm 52 mm 11.
C.A 8331 Number of channels Number of inputs Voltage (TRMS AC+DC) C.A 8333 3U / 4I 4V / 3I Voltage ratio MN clamps C193 clamp AmpFLEX™ or MA193 clamps PAC93 clamp E3N clamp Current ratio Current (TRMS AC+DC) Frequency Power values Energy values Harmonics THD Expert mode Transients Flicker (Pst & Plt) Inrush mode Unbalance yes Recording Min/Max of a selection of parameters at the max.
