Datasheet

ManualsBrandsChauvin Arnoux ManualsClamp MetersCurrent Clamp Meter, RMS, 399.9Ohm, 1MHz, LCD

MX 655 - MX 650 - MX 355 - MX 350

AC/DC Multimeter clamps

When great design combines with measurement

•

• AC

and

/or DC current up to 400 A and 1000 A

• AC/DC voltage up to 1000 V (RMS technology for MX 655)

• Resistance measurement, continuity test and diode test

• Current and voltage frequency measurement

• 4,000-count display with bargraph

• Automatic or manual calibre selection

• Complementary functions: Hold, Max/min, Peak,...

Non-contractual photo Safety precautions to be applied before any handling

Summary of content (6 pages)

PAGE 1
MX 655 - MX 650 - MX 355 - MX 350 Non -con tractu al ph oto S afety prec autio ns to be a pplie d be fore any hand ling AC/DC Multimeter clamps When great design combines with measurement • AC and/or DC current up to 400 A and 1000 A • AC/DC voltage up to 1000 V (RMS technology for MX 655) • Resistance measurement, continuity test and diode test • Current and voltage frequency measurement • 4,000-count display with bargraph • Automatic or manual calibre selection • Complementary functions: Hold, Max/mi
PAGE 2
4 clamps for all your clamping diameters Excellent value for money Dedicated to measurement of high voltages and currents, the MX 655 and MX 650 clamps can handle large cables up to 40 mm (MX 655) and 36 mm (MX 650) in diameter! Particular care has been taken with the ergonomics of these clamps, as witnessed by their excellent handling.
PAGE 3
e! MX 655 - MX 650 - MX 355 - MX 350 AC/DC Multimeter clamps General use or high-level measurements: something for everyone The MX 655 and MX 650, are specially recommended for measurement of high voltages and currents (up to 1000 A and 750 V), completed by an RMS converter for AC signals (MX 655). For currents, the MX 655, which uses a Hall-effect measurement system, is capable of measuring AC or DC currents on cables up to 40mm in diameter.
PAGE 4
Indispensable test tools Frequency measurements Combining all the functionalities of an ammeter clamp and a complete AC/DC multimeter, the MX 355, MX 350, MX 655 and MX 650 clamps provide the measurement solutions that every electrician needs: AC/DC current, voltagesC, resistance measurement, continuity and frequency. They also have a wide range of functionalities which make them safe, handy and ergonomic tools.
PAGE 5
Resistance / continuity measurement and diode test By simply turning the knob, the four clamp models test continuity (indicated by a buzzer) and measure the resistance of the circuit. Furthermore, the MX 655 and MX 650 can also perform the diode test very simply. The particularly well-designed ergonomics of the clamps allows access inside electrical cabinets where the space between cables is usually minimal.
PAGE 6
GENERAL SPECIFICATIONS Clamping Ø Display Bargraph Range change Function keys IEC 61010-1 and IEC 61010-2-032 safety norms Operating temperature Storage temperature Power supply Battery charge life Auto cut-off Dimensions Weight Warranty MX 655 40 mm MX 650 36 mm MX 355 30 mm MX 350 26 mm 4,000 counts 42 segments Automatic Automatic or Manual Automatic or Manual Automatic Hold-Peak - Max/Min - ∆Rel Hold-Peak - Max/Min - ∆Rel - Range HOLD - ∆ Zero - Range HOLD Cat.III, 600 V Cat.III, 300 V - Cat.