Datasheet

ManualsBrandsCHAUVIN ARNOUX ManualsTest & Measurement AccessoriesZange E3N inkl. NetzadapterClip-on ammeter adapter 0.05 - 100 A 11.8 mm

Non-contractual document

906101974 - Ed 3 - 00

10.00 (1/2)

series

AC/DC current clamps

series

The E

series clamps use Hall-effect technology for the

measurement of AC and DC currents from several milliamps

to over 100 A.

These clamps' narrow, elongated design makes them ideal

for measurements in cable bundles or in other conned

areas like circuit boards, motor controls or motor vehicle

electrical circuits.

Their low phase shifting also ensures excellent performance

for power measurements.

These clamps have a voltage output (mv) and their ability

to measure AC and DC signals is useful for true RMS

measurements.

Model E6N is the most sensitive for low current

measurements.

The E series clamps all make excellent work mates for

multimeters, recorders and logging equipment, etc. Model

E3N can even be connected directly to an oscilloscope.

Summary of content (8 pages)

PAGE 1
AC/DC current clamps EN series EN series The EN series clamps use Hall-effect technology for the measurement of AC and DC currents from several milliamps to over 100 A. These clamps' narrow, elongated design makes them ideal for measurements in cable bundles or in other confined areas like circuit boards, motor controls or motor vehicle electrical circuits. Their low phase shifting also ensures excellent performance for power measurements.
PAGE 2
AC/DC current clamps EN series + Ø 11.8 mm max I +- Zero 67 mm Non-contractual document 906101974 - Ed 3 - 00 36 mm 10.
PAGE 3
AC/DC current clamp Model E1N Current 2 A AC/DC 150 A AC/DC Output 1 mV/mA 1 mV/A EN series Electrical specifications Current range: 50 mA...150 A AC/DC over two calibres Output signal: 1 mV/mA and 1 mV/A AC or DC Accuracy and phase shift (1): Calibre 1 mV/mA (1 V/A) Current range 50 mA…2 A DC 50 mA…1.5 A AC Accuracy in % of output signal 2 % ± 20 mV Frequency range Phase shift Min load impedance Noise DC…65 Hz: 3° 1 mV/A 500 mA...150 A 500 mA…100 A AC/DC: 1.
PAGE 4
Oscilloscope clamp for AC/DC current Model E3N (insulated AC/DC current probe) Current 10 A peak 100 A peak Output 100 mV/A 10 mV / A EN series Description The E3N clamp is designed to measure AC and DC currents by using Hall-effect technology. Its narrow, elongated shape makes it ideal for measurements in cable bundles or in confined spaces such as the wiring on switchboards, motor control units and electrical circuits on motor vehicles.
PAGE 5
Oscilloscope clamp for AC/DC current Model E3N (insulated AC/DC current probe) EN series Curves 100 A calibre error Linearity with DC current Ip Frequency response Phase shift MEASUREMENT CURRENT: 1 A PEAK –––– ––°–– –––– ––°–– Range: 100 mV/A Range: 10 mV/A Range: 100 mV/A Range: 10 mV/A frequency Measurement current: 1 A peak frequency Immunity regarding an external conductor Limitation of measurable current according to the frequency Conductor perpendicular to clamp conductor parallel to
PAGE 6
Oscilloscope clamp for AC/DC current Model E3N (insulated AC/DC current probe) EN series Curves 100 A calibre 1 A peak 2 A peak Input signal: X: 1 ms/div Y: 0.5 V/div Input signal: X: 2 ms/div Y: 0.2 V/div Clamp output signal X: 1 ms/div Y: 50 mV/div Clamp output signal X: 2 ms/div Y: 200 mV/div Input signal: X: 0.1 ms/div Y: 0.5 V/div Input signal: X: 5 ms/div Y: 0.2 V/div Clamp output signal X: 0.
PAGE 7
Oscilloscope clamp for AC/DC current Model E3N (insulated AC/DC current probe) EN series Curves 10 A calibre 10 A peak Input signal: X: 1 ms/div Y: 0.5 V/div Input signal: X: 0.1 ms/div Y: 0.5 V/div Clamp output signal X: 1 ms/div Y: 50 mV/div Clamp output signal X: 0.1 ms/div Y: 50 mV/div Input signal: X: 10 µs/div Y: 0.5 V/div Clamp output signal X: 10 µs/div Y: 50 mV/div insertion impedance (m.
PAGE 8
AC/DC current clamp Model E6N Calibre 2 A AC/DC 80 A AC/DC Output 1 mV/mA 10 mV/A EN series Electrical specifications Current range: 5 mA...80 A AC/DC over two calibres Output signal: 1 mV/mA and 10 mV/A AC or DC Accuracy and phase shift (1): Calibre Current range 1 mV/mA (1 V/A) 5 mA...2 A DC 5 mA...1.5 A AC % Accuracy of output signal Frequency range Phase shift Min load impedance Noise 2 % ± 5 mV DC...2 kHz DC...65 Hz: 1° > 10 kΩ DC...1 Hz: 2 mV 1 Hz...10 kHz: 10 mV 10...