User manual

English
50 C.A 6681 Cable Locater
Remark:
If the cable supplied by the signals from the transmitter is near other conductors
that are parallel to it (example: cable tray, channel, etc.) or is interlaced with or
crosses them, the signal may then propagate in these cables and create spurious
circuits.
3.2.2 LOCATING BREAKS IN LINES
Preconditions:

The circuit must be dead.

All the other lines must be earthed as shown in Fig. 11.

Connect the transmitter to the wire in question and to earth as shown in
Fig. 11.
Fig.11
Remarks:

The transition resistance of the break in the line must be greater than
10kOhms.