User manual

English
62 C.A 6681 Cable Locater
3.3.5 SORTING OR IDENTIFICATION OF CONDUCTORS BY PAIR
Pre
conditions:

The circuit must be dead.

The ends of the wires of each pair must be twisted together and be mutually
conducting; each pair remains insulated from the others.

Connect the transmitter as shown in Fig. 22.

The measurement method is the same as in the example.
Fig.22
Remarks:

The ends of each pair must be twisted together (pairwise) in order to ensure
perfect continuity.

When several transmitters are used, each transmitter must be set to a
different transmission code

If only one transmitter is used, make several measurements with different
connections between the transmitter and the various pairs.