Instructions

14
Page
1 - Presentation ....................................................... 14
2 - Description ......................................................... 15
3 - True rms value ................................................... 16
4 - DC and AC voltages (V DC and AC) ................. 18
5 - Decibels (dB) ..................................................... 19
6 - Currents (A DC and AC) ................................... 19
7 - Resistances (Ω) ................................................ 20
8 - Continuity sound test [
] ............................... 21
9 - Diode test ( ) ................................................ 21
10 - Frequencies (Hz) ............................................... 21
11 - General specifications ....................................... 22
12 - Accessories and spares (To order) ................. 22
13 - Warranty ............................................................ 22
14 - Maintenance ....................................................... 23
15 - Appendix ............................................................ 57
CONTENTS
1 - PRESENTATION
The analogue and digital C.A 5011 multimeter is designed for the daily
needs of professionals in electricity. It gives the true rms (TRMS)
value. It has the following functions:
- Voltmeter: voltage measurements (V DC and AC)
- Ammeter: measurement of currents (A DC and AC)
- Ohmmeter: resistance measurements (Ω)
- Continuity sound test [ ]
- Diode test ( )
- Frequencymeter (Hz)
It also allows the measurement of decibel levels (dB), on the AC
voltmeter ranges. Its digital display has backlighting ( ), gives the
max (MAX) values and allows the last measurement to be held in
memory (HOLD).
The dial has a fuse test light (Fus.) and “Voltest” light to check the
absence of voltage on ohmmeter.
NB: Always use accessories suited to the voltage and the
overvoltage category of the circuit to measure (to NF EN 61010).