Technical data

Initial Configuration
Configuring Check Point 21400 VSX Page 13
The Network Connections window opens.
2. Enter 2.
The Configure connection window opens.
3. Enter the number to select the Mgmt interface.
The Choose Mgmt item to configure window opens.
4. Enter 1.
The Change IP settings window opens.
5. Enter an IP address, network mask, and broadcast address for the Management interface.
6. Enter e twice to return to the Network Configuration window.
7. Enter 5.
The Routing window opens.
8. Enter 1.
The Set Default Gateway window opens.
9. Enter the parameters for the default gateway of the network.
10. Enter e twice to return to the Network Configuration menu.
11. Enter n.
The Time and Date Configuration window opens.
Setting Network and Time/Date Properties
To set the system time and date:
1. In the Time and Date Configuration window, set the time zone, date, and local time.
2. Enter n to continue.
3. Enter n again and continue with the Check Point Configuration Program.
4. Read the license agreement.
5. Enter y.
The Cluster Options window opens.
Selecting Cluster Options
You can configure the VSX appliance to work with clusters of virtual systems.
To configure VSX clustering features:
1. Configure VSX clustering features.
 Enter y to enable and configure VSX clustering.
 Enter n to skip VSX clustering configuration. Skip step 2.