User Manual

EXTRA HEAVY DUTY
2, 3, 4, or 5 CHANNEL SYSTEMS
ASSEMBLY:
• Inspect areas for safety hazards
• Assemble sections by aligning female connectors over male connectors
• Press with foot to secure female connectors to male connectors
• Open cover and install cables down into channels
• Close cover flush with base
• Test installation for intended use
• Periodically inspect installation
CHANNEL CAPACITY:
LOAD CAPACITY:
The Cable/Hose Protection System has
different load supporting capabilities
depending on type of vehicle and
temperature. Suitability must be verified
by testing under actual conditions.
OPERATING TEMPERATURE:
-40
˚
F to 120
˚
F (-40
˚
C to 48
˚
C)
CHEMICAL RESISTANCE:
Tested for compatibility with common motor oils, gasoline and diesel fuel.
Limited resistance to brake fluids and other chemicals.
MATERIAL:
UV-stabilized polyurethane elastomer
CABLE/HOSE MANAGEMENT COMPONENTS
ASSEMBLY INSTRUCTIONS
#ZIS-HD
Ver: 2/11
Simply interlock with
T-connectors to extend
protection length.
36" Lineal ProtectorEnd Cap End Cap 45˚ Left Turn 45˚ Right Turn
HD
CHANNEL CAPACITY - MAX. DIAMETER INCHES (mm)
5 Channel
4 Channel
3 Channel
2 Channel
End Caps (2)
End Caps (2)
End Caps (2)
N/A
45˚ Left Turn
45˚ Left Turn
45˚ Left Turn
N/A
45˚ Right Turn
45˚ Right Turn
45˚ Right Turn
N/A
1.25 in. (31.8 mm)
1.25 in. (31.8 mm)
2.25 in. (57.2 mm)
3.25 in. (82.6 mm)
NO. OF
CHANNELS
5 Channel
4 Channel
3 Channel
2 Channel
20,150 lbs. (9,140 kg)
20,150 lbs. (9,140 kg)
14,210 lbs. (6,446 kg)
10,880 lbs. (4,935 kg)
MAXIMUM LOAD PER TIRE
70
˚
F (21
˚
C)
40,300 lbs. (18,280 kg)
40,300 lbs. (18,280 kg)
28,420 lbs. (12,892 kg)
21,760 lbs. (9,870 kg)
MAXIMUM LOAD PER AXLE
70
˚
F (21
˚
C)