Owner manual

- 18 -
To continue measuring, press ESC repeatedly until the start
screen with the four dashes - - - - is displayed.
To print statistical values:
1. Press ▼ repeatedly until Statistics appears n display.
2. Press OK. Printout Of Statistics appears.
3. Point instrument with the IR transmitter (top end face)
towards the IR adapter installed on the printer. The distance
should be approx. 12” to 20” (30cm to 50cm).
4. Press OK. The data are transmitted, and Printing... will
briefly appear, followed by the start screen with the four
dashes - - - -.
To continue measuring, press ESC repeatedly until the start
screen with the four dashes - - - - is displayed again.
6.4 Deletion of statistical values and of single values
1. Press ▼ repeatedly until Statistics appears on display.
2. Press OK. Printout Of Statistics appears
3. Press ▼ repeatedly until Deletion Of Statistics appears
4. Press OK. The statistical values with the single values are
deleted. Statistics deleted will briefly appear on the display,
then the start screen with the four dashes - - - - .
Quick deletion of statistics and stored readings
1. Press ESC repeatedly until the start screen with the four
dashes - - - - is again displayed.
2. Press ESC until Deleted Statistic? appears on the display.
3. Press ESC again. Statistics Deleted will briefly appear,
then the start screen with the four dashes - - - -.
- 11 -
Using Rechargeable batteries
When using rechargeable batteries, the battery symbol always
flashes, because rechargeable batteries provide a lower voltage
than non-rechargeable batteries. To eliminate this situation:
1. Press ▼ repeatedly until Options appears on the display.
2. Press OK.
3. Press ▼ until Power Supply appears on the display.
4. Press OK.
5. Press ▼ until Rechargeable Batteries appears on the
display.
6. Press OK.
Supply with Rechargeable Batt appears briefly on the screen,
followed by - - - . The procedure is complete.
- 18 -
To continue measuring, press ESC repeatedly until the start
screen with the four dashes - - - - is displayed.
To print statistical values:
1. Press ▼ repeatedly until Statistics appears n display.
2. Press OK. Printout Of Statistics appears.
3. Point instrument with the IR transmitter (top end face)
towards the IR adapter installed on the printer. The distance
should be approx. 12” to 20” (30cm to 50cm).
4. Press OK. The data are transmitted, and Printing... will
briefly appear, followed by the start screen with the four
dashes - - - -.
To continue measuring, press ESC repeatedly until the start
screen with the four dashes - - - - is displayed again.
6.4 Deletion of statistical values and of single values
1. Press ▼ repeatedly until Statistics appears on display.
2. Press OK. Printout Of Statistics appears
3. Press ▼ repeatedly until Deletion Of Statistics appears
4. Press OK. The statistical values with the single values are
deleted. Statistics deleted will briefly appear on the display,
then the start screen with the four dashes - - - - .
Quick deletion of statistics and stored readings
1. Press ESC repeatedly until the start screen with the four
dashes - - - - is again displayed.
2. Press ESC until Deleted Statistic? appears on the display.
3. Press ESC again. Statistics Deleted will briefly appear,
then the start screen with the four dashes - - - -.
- 11 -
Using Rechargeable batteries
When using rechargeable batteries, the battery symbol always
flashes, because rechargeable batteries provide a lower voltage
than non-rechargeable batteries. To eliminate this situation:
1. Press ▼ repeatedly until Options appears on the display.
2. Press OK.
3. Press ▼ until Power Supply appears on the display.
4. Press OK.
5. Press ▼ until Rechargeable Batteries appears on the
display.
6. Press OK.
Supply with Rechargeable Batt appears briefly on the screen,
followed by - - - . The procedure is complete.