Manual

ManualsBrandsCheckline ManualsMeasuring instrumentsBP1

 Electromatic Equipment Co., Inc.

-16-

NOTES

 Electromatic Equipment Co., Inc.

-1-

TABLE OF CONTENTS

1.0 Design of the device ………………………………………………… 2

2.0 Measuring Procedure ………………………………………………. 3

3.0 Calibration curves ……………….………………………………..… 5

4.0 Menu level overview ………………………………………………... 6

5.0 Keypad symbols …………………………………………………….. 7

6.0 Changing batteries ………………………………………………..… 8

7.0 Determination of the material moisture …………………………… 8

8.0 Transfer saved data to the PC ……………………………………… 9

9.0 Print saved data ……………………………………………………… 11

10.0 Technical data …………………………………………………….…. 12

11.0 Most common reasons for miss readings ……….……………..… 13

12.0 Device maintenance instructions ………………………………..… 13

13.0 Warranty ……………………………………………………………… 14

Summary of content (9 pages)

PAGE 1
NOTES TABLE OF CONTENTS 1.0 Design of the device ………………………………………………… 2 2.0 Measuring Procedure ………………………………………………. 3 3.0 Calibration curves ……………….………………………………..… 5 4.0 Menu level overview ………………………………………………... 6 5.0 Keypad symbols …………………………………………………….. 7 6.0 Changing batteries ………………………………………………..… 8 7.0 Determination of the material moisture 8.0 Transfer saved data to the PC 9.0 Print saved data 10.0 Technical data 11.0 Most common reasons for miss readings 12.
PAGE 2
1.0 DESIGN OF THE DEVICE NOTES Filling assistance Optional: PC interface Measuring chamber Moisture content Name of calibration POWER button Change the calibration curve Batteries slot (flipside)  Electromatic Equipment Co., Inc.  Electromatic Equipment Co., Inc.
PAGE 3
13.0 WARRANTY 2.0 Electromatic Equipment Co., Inc. (Electromatic) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications thereof.
PAGE 4
7. Fill up the measuring device with the sample pellets. The filling needs to be done slowly and constantly to ensure reproducible results. 11.0 • MOST COMMON REASONS FOR MISS READINGS Product temperature out of application range Material below 0°C resp. above 40°C (32 to 104 °F) may cause faulty measurements. The storage of cold material in a warm storage area usually creates condensed water which may lead to major measuring errors. • 8.
PAGE 5
10.0 TECHNICAL DATA 3.0 CALIBRATION CURVES Resolution of the display 0,1% moisture content 0,5°C temperature Measuring range 3 up to 20 % moisture content Operation temperature 0°C up to 40°C Storage temperature -20°C up to 60°C Temperature compensation Automatically Power supply 4 pcs. 1.
PAGE 6
4.0 MENU LEVEL OVERVIEW 9.0 PRINT SAVED DATA (Only possible with humimeter serial interface module in combination with Schaller thermo printer) Type selection menu Next calibration curve Previous calibration curve Power off (3 sec.) Store menu Watch the saved data (logs) Save new value (log) Power off (3 sec.) To print your saved logs, connect the printer to the humimeter serial interface using the cable that was delivered with your device. To switch on the printer, press the ON/OFF button.
PAGE 7
Using a USB-RS232 adapter with the data link cable to transfer data to a PC (Only possible with humimeter serial interface module) 5.0 KEYPAD SYMBOLS Connect the USB-RS232 adapter to your PC. In Windows XP and Vista the adapter for the operating system is automatically recognized. Follow the instructions of the operating system. Measuring window: : Rolling Menu In order to adjust the correct connection of the humimeter LogMemorizer you have to know the port number.
PAGE 8
6.0 CHANGING BATTERIES 8.0 TRANSFER SAVED DATA TO THE PC Your new device is provided with batteries. (Only possible with humimeter serial interface module) Change of batteries: To send your saved logs to your PC, connect the humimeter-device to your PC using the cable that was delivered with your device. You can either connect it directly to a serial port on your PC or use the enclosed serial-USB adapter. 1. Press with your finger onto the arrow of the battery cap and pull it back. 2.
PAGE 9
BP1 PELLET MOISTURE METER OPERATING INSTRUCTIONS