Owner manual

ManualsBrandsCheckline ManualsMeasuring instrumentsDIW

TORQUE MEASUREMENT

2 YEAR WARRANTY (RESTRICTIONS APPLY)

Imada, Inc. warrants its products to the original purchaser to be free from defects in

workmanship and material under normal use and proper maintenance for two years (one

year for adapters, attachments, batteries, and cables) from original purchase. This warranty

shall not be effective if the product has been subject to overload, shock load, misuse,

negligence, accident or repairs attempted by others than Imada, Inc.

During the warranty period, we will, at our option, either repair or replace defective

products. Please call our customer service department for a return authorization number

and return the defective product to us with freight prepaid.

The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby

disclaim all other warranties, express, statutory or implied, applicable to the products and/or

software, including but not limited to all implied warranties of merchantability, fitness, non-

infringement, results, accuracy, security and freedom from computer virus. In no event shall

Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or

punitive damages in connection with the use of its products and/or software.

12/08

Digital Torque

Wrenches

INSTRUCTION MANUAL

Models: DIW-15/20/75/120

with continuous data output

Summary of content (6 pages)

PAGE 1
TORQUE MEASUREMENT 2 YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years (one year for adapters, attachments, batteries, and cables) from original purchase. This warranty shall not be effective if the product has been subject to overload, shock load, misuse, negligence, accident or repairs attempted by others than Imada, Inc.
PAGE 2
TORQUE MEASUREMENT TORQUE MEASUREMENT Digital Torque Wrench/Tester Models: DIW-15/20/75/120 List of Equipment 1 2 3 4 DIMENSIONS DIW-15/20/75/120 1 2 Torque Wrench/Tester Stepless CW one-way clutch (included for DIW-15/20/75 available for DIW-120) AC adapter/charger Carrying case 4 3 DIW-15/20/75/120 Digital Torque Wrench/Tester Ranges Accuracy ± 0.5% F.S., ±1 LSD Model DIW-15 DIW-20 DIW-75 DIW-120 lbf-in 2.0~130 2.0~180 2.0~650 20~1040 lbf-ft — — — 2.0~87.0 Capacity kgf-cm 2.0~150 2.0~200 2.
PAGE 3
TORQUE MEASUREMENT SPECIFICATIONS Measuring range Accuracy Display Operation Measuring modes GO/NO GO testing Statistics Data transfer Data memory Batch Counter Power supply Auto power save Charging time Working time Drive Accessories Model lbf-in lbf-ft kgf-cm N-m cN-m DIW-15 2.0~130 — 2.0~150 0.20~15 20~1500 DIW-20 2.0~180 — 2.0~200 0.20~20 20~2000 DIW-75 2.0~650 — 2.0~750 0.20~75 20~7500 DIW-120 20~1040 2.0~87.0 20~1200 2.0~120 — ± 0.5% F.S.
PAGE 4
TORQUE MEASUREMENT SELECTING MEASURING MODES Press ON/OFF to turn on. Press MODE to cycle modes GO, PP, PD or C. Select desired measuring mode, which becomes the default mode. GO Real Time, Display torque transient (no output or indicator). PP Peak, Capture peak torque (peak data output, PP appears on display). PD Peak Down, Capture peak down value (peak data output, PD appears on display). C Continuous data output, Display and output torque transients (160 data/sec., solid green LED indicator).
PAGE 5
TORQUE MEASUREMENT OUTPUT USB Virtual COM Port When the tester is connected to a computer’s USB port and turned on, Windows XP or Vista will recognize the tester and ask to connect to the Internet. Allow Windows Update to connect to the Internet and follow the instructions on your screen to download and install two drivers for the USB virtual com port. For Windows 98, ME and MAC go to www.ftdichip.com/Drivers/VCP.htm. The PC and tester will communicate through the USB port the same as a com port.
PAGE 6
TORQUE MEASUREMENT After High and Low setpoints are set and beeper is set to On, In PP mode Under LO setpoint– No LED light or beep Over LO– Green LED lights Over HI– NG flashes and beep sounds In PD mode– no indicator or beep for values before Peak down is sensed.