Instruction Manual

Unit Selector (Software)
Selecting units of measure can be changed easily from the software. Provided
on the main window is a virtual copy of the handheld unit selector switch.
The selected setting is highlighted in RED; changing the settings would require
clicking the mouse and dragging the red highlight to the appropriate setting.
The software overrides the Unit Selector Switch from the tachometer.
It is completely autonomous; all controls are transferred to the
software.
Key feature for online measurements: The tachometer can be set to almost any
place in the production line. Handheld tachometer is bus powered by the USB
making it ideal for process monitoring. As long as the host computer is “ON” the
tachometer will work (provided that the tachometer is set to USB mode).
N
ON-CONTACT RPM
CONTACT MEASURING
YARDS PER MINUTE
40