Owner manual

13
Press the “RATIO” key. The current mode will start blinking for 5 seconds allowing modification at this point.
Operation Indication
** While in the flash pulse duration setting mode, a 5 second timer will bring the unit back to default normal
mode, if no manual changes are made.
Press “PHASE+” key, or turn the dial clockwise direction to increment the Focus by 0.1°.
Press “PHASE-” key, or turn the dial counter clockwise direction to decrement the Focus by 0.1°.
Return to normal internal flashing
mode and display
When blinking, flash duration can be modified (see
next section for directions on this step)
Internal flashing mode
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
FLAS
RATIO
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
External trigger mode
Phase shift
angle
FLAS
RATIO
FLAS
RATIO
FLAS
RATIO
Flash pulse
duration
(blinking)
Phase shift
angle
Flash delay
angle
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Flash pulse
duration
(blinking)
When blinking, flash duration can be modified (see next
section for directions on this step)
Return to normal external
triggering mode and display
**
**
FLAS
RATIO
Press and release
Flash delay
angle