Owner's manual

11
4.3.6 Phase Shift (Angle)
Once "Frozen" virtual image is achieved via FPM=RPM, the phase shift function can advance or delay the
flash so that the image appears to be rotating incrementally.
Press “PHASE+” key or “PHASE-“ key to increment or decrement the phase shift angle by 3°.
The display will show the cumulative angle of the phase shift.
Operation Indication
If "PHASE +" key is pressed at 359°, it becomes 0°.
Operation Indication
If "PHASE -" key is pressed at -359°, it becomes 0° .
4.3.7 Flash Pulse Duration (FOCUS) setting
The FOCUS can be set within the range of 0.1°/360° - 1.0°/360°, with a resolution of 0.1°.
Period of flashing = 360°.
The Flash Pulse Duration (RATIO) is directly proportional to the LED brightness, which in turn, is inversely related
to the target image focus.
Ex. Flash rate 6,000 FPM
Increment phase shift by 3°
Press and release
Ex. Flash rate 6,000 FPM
Phase shift at 0°
Decrement phase shift by 3°
Press and release
PHASE+
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
PHASE-
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
FLASH
PHASE+
FLASH
PHASE-
Increment phase shift by 3°
Final phase shift of 6°
PHASE+
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○
PHASE-
Decrement phase shift by 3°
Final phase shift of -6°
Flash
360°
360°
Flashing Duration ( 0.1°- 1.0° )
ON
OFF
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
hHz
○
○○
○