Instruction Manual

3
2.0 Operating Elements
10
7.0 DX2 Model Data & Specifications
Accuracy* ± 1% of full scale or ± 1 graduation mark
on scale
Diameter of Scale 41 mm
Maximum Speed
(standard) 2000 m/min
(optional) 3500 m/min
(optional) 5000 m/min
Outer roller distance, c:c
DX2-5 to DX2-EX 38 mm
DX2-200 to DX2-1K 100 mm
DX2-2K 150 or 200 mm
Roller material
(standard) Hard-coated aluminum
(optional) Hardened steel (ST)
Chromed steel (W)
Ceramic (CE)
Plastic (PL)
Temperature limits 45–115 °F (8–45 °C)
Humidity, maximum 85%
Housing material Die-cast aluminum
Dimensions 8.6 x 3.5 x 1.7 in. (225 x 90 x 44 mm)
Weight
(up to DX2-1K) 1.1 lbs, (500 g) approx.
(DX2-2K) 2.0 lbs, (900 g) approx.
* Using factory standard materials and procedures. Special calibration using
customer sample is available.
Specications subject to change without notice.