User Manual

– 6 –
5.0 Connection


uses and labelling of these sockets are as follows:
Marking: 1

Marking: 2

Marking: Output

The assignment of plug contacts is shown in Fig 1 below..
CAUTION!

input is potential-free. The potential-free input is suitable for PNP and NPN signals. A
matching plug for these input sockets is included with the LS-9-LED.
RECOMMENDATION!
Use a shielded cable to connect the trigger signal.
CAUTION!

–7 –
5.1 Typical connection examples:
Please take connection examples from Figures 2 to 5. Please note that you will need

sensor).
 
 
B. Trigger signal from external
  
 
C. Trigger signal from optional
 
for unit and sensor from optional
AC Adapter.