User Manual

ManualsBrandsCheckline ManualsMeasuring instrumentsRH5

 Electromatic Equipment Co., Inc.

-1-

TABLE OF CONTENTS

1.0 Introduction …………………………………………………………… 2

1.1 Calibration curves

1.2 Explanation of calibration curves

2.0 Operating the instrument ……………………………………………. 3

3.0 View of the instrument ………………………………………………. 4

4.0 Menu ………………………………………………………………….. 5

5.0 Other symbols and key functions ………………………………….. 6

6.0 Other instrument functions – Overview ………………………….… 7

7.0 Common reasons for incorrect measurements ……………….….. 8

8.0 Temperature behaviour of the sensors ……………………………. 9

9.0 Looking after the instrument ………………………………………... 9

10.0 Changing the batteries ………………………………………………. 10

11.0 Liability ………………………………………………………………… 10

12.0 Optional accessories ………………………………………………… 10

13.0 Technical data ………………………………………………………... 11

14.0 Warranty ………………………………………………………………. 12

Summary of content (9 pages)

PAGE 1
TABLE OF CONTENTS 1.0 Introduction 1.1 1.2 …………………………………………………………… 2 Calibration curves Explanation of calibration curves 2.0 Operating the instrument ……………………………………………. 3 3.0 View of the instrument ………………………………………………. 4 4.0 Menu ………………………………………………………………….. 5 5.0 Other symbols and key functions 6.0 Other instrument functions – Overview 7.0 Common reasons for incorrect measurements 8.0 Temperature behaviour of the sensors 9.0 Looking after the instrument 10.
PAGE 2
1.0 INTRODUCTION To switch on the instrument, press the key for 3 seconds. If a menu item is shown, press the left key Exit or Rolling Menu until the measuring window appears. The measurement value is now shown on the display. 1.1 Calibration curves Name of calibration curve Meaning relHum Relative humidity of %RH Air Dew Point Dew point absHum Absolute humidity of g/m³ Air RH1 EMC Wood Equilibrium moisture %EMC content of wood RH1 1.
PAGE 3
2.0 OPERATING THE INSTRUMENT Switching on: Press for 3 seconds. Changing the calibration curve : Setting the time: Press or . three times - Options – Date / Time Hold the measurement value (HOLD): Press the menu Log Time) key (this must be set in the Switching on the displa y lighting: Press the key briefly; the display lighting switches off automatically after approx. 20 seconds. Pressing any key acti vates the display lighting. Switching off: Press the key for 5 seconds.
PAGE 4
3.0 VIEW OF THE INSTRUMENT 14.0 WARRANTY Electromatic Equipment Co., Inc. (Electromatic) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications thereof.
PAGE 5
13.0 TECHNICAL DATA Sensors Measurement: Meas. Range Rel. humidity: 0 to 100%RH Temperature Pt1000 DIN B °C: -10 to +60°C Temperature °F: -14 to 140°F Dew point °C: Dew point °F: abs. humidity: Equilibrium moisture content of wood: / Resolution / Accuracy / 0,1% / 0,1°C / 0,3°F -55 to +60°C -67 to 140°F 0 to 130g/m³ / 0,1°C / 0,3°F / 0,1g/m³ 2 to 30% / 0,1% / ±1,5% (0 - 90% at 25°C) / ±0,4°C (at 25°C) / ±0,7°F (at 77°F) / ±0,5% (at 25°C) Operating temp.
PAGE 6
4.0 MENU 10.0 There are 4 menu levels. The symbols show the key functions in the different menus. Rolling Menu: Use this key to enter the different menu levels and main menu. Power: Press this key for to switch the instrument off (5 sec.) or on (3 sec.). Press this key briefly to activate the display lighting. Up: This key moves you to the next type/calibration curve. Down: This key moves you to the previous type/calibration curve. Disk: Use this key to save measurement values.
PAGE 7
8.0 TEMPERATURE BEHAVIOUR OF THE SENSORS During humidity and temperature measurement there are many parameters which affect the time required until the real measurement value is displayed. 5.
PAGE 8
6.0 OTHER INSTRUMENT FUNCTIONS – OVERVIEW 7.
PAGE 9
RH1 & RH5 RELATIVE HUMIDITY METER OPERATING INSTRUCTIONS