Product Manual

User Manual
Page 7
Installation with a tripod
Primary Fall Arrest Device with
Secondary Backup
Primary Raise and Lower Device
with Secondary Backup
FABX2R/FABXLR FABX2R/FABXLR WG-01
When entering a confined space when a fixed
access system is installed the user should use:
1 x Tripod (TR3)
1 x SRLR (FABX2R or FABXLR)
1 x SRLR adaptor bracket (FABXR-DB/FABXLR-DB)
The FABX2R/FABXLR should be in free run mode
and in the event of a fall the device will automatically
lock on and then the winch can be engaged.
PLEASE NOTE THAT THE FABX2R/FABXLR IS
NOT INTENDED TO BE USED AS A CONTINUOUS
WINCH, ONLY AS A RETRIEVAL DEVICE IN
EMERGENCY SITUATIONS.
When entering a confined space when there is no
fixed access system and there is a need to lower
the user down under control, you should use:
1 x Tripod (TR3)
1 x SRLR (FABX2R or FABXLR)
1 x SRLR adaptor bracket (FABXR-DB/FABXLR-DB)
1 x Work winch (WG-01)
1 x winch adaptor bracket (WG-02)
THE WG-01 IS YOUR PRIMARY LOWERING
DEVICE AND IN THE EVENT OF A FALL THE
FABX2R/FABXLR WILL AUTOMATICALLY LOCK
ON AND THE WINCH CAN BE ENGAGED.
WARNING: Prevent slack line while in rescue mode.