Product Manual

User Manual
Page 8
Restrictions, Exclusions, Compatibility & Storage
Restrictions:
Do not use if the lanyard does not retract.
Do not use if you exceed the maximum weight of 310lb.
Do not use this device to arrest materials (as a load arrestor).
Do not let the SRL lanyard entangle around any limbs or around the body - ensure the lanyard runs straight
from the harness D-ring to the SRL.
Do not jump or step down quickly when using the SRL as this may activate the brakes.
Exclusions:
The manufacturer will NOT be responsible for:
a. Users who are out of the scope of any written manuals of training given.
b. Any device that has NOT been inspected under the current legislation and manufacturers guidelines.
c. Devices that have been damaged.
d. When the maximum user weight (including clothing and tools) has been exceeded.
e. Devices that have NO serial number markings, and the manufacturers name is not present.
Compatibility:
When making connections with Xcalibre SRL, eliminate all possibility of roll-out. Roll-out occurs
when interference between a hook and the attachment point causes the hook gate to unintentionally open
and release. All connections must be selected and deemed compatible with Xcalibre SRL by a Competent
Person. All connector gates must be self-closing and self-locking, and withstand minimum loads of 3,600
lbs. See the following for examples of compatible/incompatible connection.
Storage:
Storage in a central protected location allows assurance of inspection on issue and return.
The SRL should be stored in a clean dry place where it can be protected from damage by chemical
exposure and sharp objects . It should be stored with its instructions and record card at all times.
Return the SRL back to it’s original box or other suitable container for storage & transportation.
After use return to the container. Never leave the device lying around site.