User`s guide

©Microcontroller-café & Checkpoint LAB M35160 ERASER/PROGRAMMER User’s Guide
12
You'll see on numeric display message
“ LE“ - load EEPROM (from address 32 DEC)
4.4 RDINC / WRINC : PC mode
Practical steps:
1. RDINC" button - read incremental area. This will read first sixteen bit incremental
registers from the device (M3508/M35160) into the file (Figure 9)
Figure 14
2. "WRINC" button – write incremental area. This will write first sixteen bit incremental
registers from the file (Figure 13) into the target device.
Figure 15
Status message -->
Step 3
Buffer view
Click WRINC button
Click RDINC button