User`s guide

©Microcontroller-café & Checkpoint LAB M35160 ERASER/PROGRAMMER User’s Guide
4
3. Installing
To understand M35160 Eraser/Programmer components meaning (Figure 1)
Installing M35160 Eraser/Programmer control software and hardware:
• Navigate CPL CD-ROM : “Install Software” > “Install M35080 Eraser”, then execute
“Setup.exe” file. Follow to the setup wizard
• Connect M35160 Eraser/Programmer to the power supply source (10-15 V >=500 mA)
• Attach M35160 Eraser/Programmer to PC
• Make sure that "mode" jumper mounted to the “PC” or “AU” position
• Install target device into the target socket, notice the orientation of the device (Figure 3)
• Turn ON power supply source, power LED appear to green colour and you'll
should see “PC” or “AU” message on the numeric display
• M35160.exe control software can be start, if “Function” jumper mounted into PC
position. Otherwise, if “Function” jumper mounted into AU position M35160
Eraser/Programmer will remain autonomous operation mode
M35160 ERASER/PROGRAMMER components:
Figure 1
Serial
p
ort
L
ed
1RD
1
2
Beeper
Target
socket
LED
indicator
A
U
P
C
3 4 5
6
7
8
160 TST 080
Power
jack
Led2
9
WR
10
11
L
ed
3
12
13
14
1516
RST