User's Manual

SIDEP
Page 4 of 19
Table of Contents
1. GENERAL INFORMATION 5
1.1 ANTENNA TYPES 5
1.2 BOARD INTRODUCTION 6
1.3 POWER SUPPLY 7
1.4 TEST RANGE 8
2. GENERAL INSTALLATION 9
2.1 IMPLEMENTING ANTENNAS 9
2.2 INTERFERENCE SOURCES 9
3. SELECTION OF FUNCTIONING MODES WITH DIP SWITCH 11
4. BASIC ADJUSTMENT PROCEDURE 12
4.1 SINGLE SYSTEM ADJUSTMENT 12
5. MULTIPLE SYSTEM SYNCHRONIZATION 13
5.1 EXTERNAL SYNCHRONIZATION MODE WITH CABLE (UP TO 25 SYSTEMS BY
230V 50HZ MAIN POWER OR UP TO 25 SYSTEMS 120V 60HZ MAIN POWER) 13
5.2 SUPPLY SYNCHRONIZATION MODE WITH (UP TO 4 SYSTEMS BY 230V 50HZ
MAIN POWER OR UP TO 4 SYSTEMS 120V 60HZ MAIN POWER) 13
5.3 DEACTIVATOR SYNCHRONISATION 13
6. TROUBLE SHOOTING 14
7. ADVANCED ADJUSTMENT OF SYSTEM PARAMETERS 15
7.1 LEDS DS11-18 15
8. CONNECTIONS FROM MONO BOARD TO ANTENNA 16
9. MECHANICAL INSTLLATION 17